Water And Water Stone Paint Stone Wall Paint Similar To Dulux For
Exterior Wall imitation granite OEM
1 High degree of simulation, imitating the effect of marble
pattern, almost real.
2 The construction is simple, no intermediate coating is required,
and only three processes of primer/imitation stone color
spots/varnish are required.
3 The heat insulation effect is strong, and the temperature of each
cubic space can be reduced by five to ten degrees compared with the
conventional ordinary stone-like paint.
4 The thermal insulation effect is good, and the indoor temperature
change is small.
5 The paint film is soft, gentle, and crack resistant.
6 The paint film is light, not easy to fall off, and has good
safety.
7 The coating rate is one-third less than that of conventional
imitation stone paint, but the price is comparable to that of
ordinary imitation stone paint, so the construction cost is lower.
Brushing Area:1 kilograms 2 square meters
| Name | Imitation Stone Paint |
| Main Raw Material | Acrylic |
| Usage | Building Coating |
| Other Names | Spray Stone Paint |
| Application Method | Spray |
| State | Liquid Coating |
| Main Component | Acrylic Emulsion, Natural Stone Powder |
| The Oretical Consumption | 3~4kg/m2/coat (thickness Of Dry Film 2mm) |
| Touch Dry | 2H/20-25℃ |
| Totally Dry | 48H/20-25℃ |
| Recoat Time | 2-6H Based On Temperature>5℃& Humidity<85% |
Introduction:
Colorful Stone-Liquid Paint is made of special high-tech
water-based weather-
resistant resin and developed by advanced production technology. It
is a new high-
grade product of water-in-water imitation granite colorful texture.
Features:
High-tech building paint with colorful stone texture
Compared with traditional exterior wall coatings and collage tiles,
the multi-layered
granite texture imitated by colorful impression stone can fully
express the texture of
natural stone and enhance the outstanding value of architecture.
Through careful
planning and design, the film modeling style is varied and highly
textured;
Excellent performance, international environmental protection color
recording
coating
The paint has superior stain resistance and durability. The
construction process is
simple, the construction base is not limited, nor will it cause
pollution of the
construction environment.
Application:
Building interior wall, exterior wall, line board, decorative
modeling, special
modeling, etc.
Applicable base surface
Cement mortar surface, concrete surface, the external insulation
plastering surface,
fiber cement board, wood board, etc.
Surface requirements:
Base surface: the strength should be above 5kgf/cm; Water content
below 10%; PH
below 10.
Climate: temperature above 5̊C; Air humidity below 85%; Wind speed
below 5m/s
