Water And Water Stone Paint Waterborn Coating Stone Wall Paint For
Exterior Wall imitation granite OEM
Main composition
Lead free pigment, acrylic copolymer, water and additive.
Application
Widely used for coating of outdoor surface of bricks, stones and
concrete of villas, apartments, guesthouses, hotels and
hospitals, etc.
Usage
0.3kg/㎡ one time
Package
18kg/Drum or customized
Construction Process
Wall treatment → Spraying primer (1 time) → Spraying finish (2
times) ----(according to the actual situation can choose different
matching)
Brushing Area:1 kilograms 2 square meters
Name | Imitation Stone Paint |
Main Raw Material | Acrylic |
Usage | Building Coating |
Other Names | Spray Stone Paint |
Application Method | Spray |
State | Liquid Coating |
Main Component | Acrylic Emulsion, Natural Stone Powder |
The Oretical Consumption | 3~4kg/m2/coat (thickness Of Dry Film 2mm) |
Touch Dry | 2H/20-25℃ |
Totally Dry | 48H/20-25℃ |
Recoat Time | 2-6H Based On Temperature>5℃& Humidity<85% |
Introduction:
Colorful Stone-Liquid Paint is made of special high-tech
water-based weather-
resistant resin and developed by advanced production technology. It
is a new high-
grade product of water-in-water imitation granite colorful texture.
Features:
High-tech building paint with colorful stone texture
Compared with traditional exterior wall coatings and collage tiles,
the multi-layered
granite texture imitated by colorful impression stone can fully
express the texture of
natural stone and enhance the outstanding value of architecture.
Through careful
planning and design, the film modeling style is varied and highly
textured;
Excellent performance, international environmental protection color
recording
coating
The paint has superior stain resistance and durability. The
construction process is
simple, the construction base is not limited, nor will it cause
pollution of the
construction environment.
Application:
Building interior wall, exterior wall, line board, decorative
modeling, special
modeling, etc.
Applicable base surface
Cement mortar surface, concrete surface, the external insulation
plastering surface,
fiber cement board, wood board, etc.
Surface requirements:
Base surface: the strength should be above 5kgf/cm; Water content
below 10%; PH
below 10.
Climate: temperature above 5̊C; Air humidity below 85%; Wind speed
below 5m/s