Home Companies VVDI Technology Co.,LTD

V5.2.5 VVDI 2 Car Key Cutting And Programming Machine Full Version Timely Update

Active Member

Contact Us

[China]

Address: The 6th Floor, No. 88 Jinggui Road, Yuhua District, Changsha City, Hunan Province, China

Contact name:Lisa

VVDI Technology Co.,LTD

V5.2.5 VVDI 2 Car Key Cutting And Programming Machine Full Version Timely Update

Country/Region	china
City & Province	changsha hunan
Categories	Monitoring & Diagnostic Equipment

Product Details

Original Xhorse V5.2.5 VVDI 2 Key Programmer

Note:Just as the software update at a high frequency,so that we cancel the CD in the package,sorry for this.But do not worry,we will send you the download link when you place an order,or you can contact me for the newest version,Hope you can understand that!

VVDI 2 Key Programmer Full Version

Top 7 Reasons to Get VVDI2:

1. This VVDI2 Full Package Contains Basic Function +For VW +For BMW + For Porsche+For PSA + For AUDI Generation 5 Function + For BMW OBD Fucntion + For BMW CAS4 Functions + For Tango + For J2534

2. VVDI2 Full Package Covers All the Functions of VVDI, VVDI 5th IMMO Adapter, For BMW Multi Tool & CAS Plus for BMW Multi Tool

3. Support For VW, For Audi, For BMW, For Porsche & For PSA

4. Update Online Free Lifetime

5. Latest Version: V5.2.5 VVDI2 V5.2.5 Software Free Download (You can contact us to get the link)

6.Newly Add

7. If you have iKeycutter CONDOR XC-MINI, we can open the authorization to read pin, cs, mac.

VVDI2 - for BMW FEM/BDC system (function released and available, just no user manual)

Users can refer to following information (3 steps for make keys:get key info->programming FEM/BDC system->make keys)

1.support make new key with ignition switch(support add spare key and all key lost, all key lost require ISN)

2.support reset FEM/BDC KM(cluster require reset manually)

3.support erase key(after erase the key position become blank position)

4.support backup coding

5.support restore coding

Notes

1. backup coding and restore coding can direct operation generally.

2. add keys, reset KM, erase key must programming FEM/BDC system first

3. in FEM/BDC interface, if 'get key info' the type not support, it will show:customer should use "for BMW E-sys software" program FEM/BDC system.then programming FEM/BDC system with VVDI2-for BMW

4. when operation on 'programming FEM/BDC system'interface,please don't close this software window until all procedures completed.

5. programming FEM/BDC system, require soldering and get eeprom.(FEM 95128 chip, BDC 95256 chip)usually there are 2 same chips on the module, please refer to the software diagram, select the correct one.

6. programming FEM/BDC system,must restore the original eeprom, restore coding.if cannot restore coding or after restore coding assemble FEM/BDC module back to car,but with problem(such as the remote control cannot start the car

or the car with window problem)please use "for BMW E-sys software" coding for FEM/BDC system

7. if connect power to FEM/BDC module, but the relay keep ringing,please contact technical support for help.usually operation on FEM/BDC should be ok,just need to programming.

VVDI2 latest software version V5.2.1 update

*** 2018-01-23
*** Require firmware V5.2.0

==For VAG V5.2.1 ==

1. Bugfix for access some MQB(Continental/VDO) instrument
2. Improvement for prepare MQB dealer key: Now we support all original blank key or MQB key made by VVDI
3. Improvement for MQB key learning
4. Improvement for autodetect in IMMO4 system
5. Bugfix for spanish language
6. Bugfix

== For BMW V5.2.1 ==
1. Bugfix for spanish language
2. Bugfix

== For Porsche V5.2.1 ==

1. Bugfix for spanish language
2. Bugfix

== For PSA V5.2.1 ==

1. Bugfix for spanish language
2. Bugfix

== Transponder Programmer V5.2.1 ==
1. Bugfix for spanish language
2. Bugfix

== For J2534 V5.2.1 ==
1. Bugfix for spanish language
2. Bugfix

== Online Upate Tool V5.2.1 ==
1. Bugfix for spanish language
2. Bugfix

== Quick Start V5.2.1 ==
1. Bugfix