Home Companies Guangzhou V-Solution Telecommunication Technology Co., Ltd.

1GE 3FE Wifi FTTH EPON ONU Modem For Fiber Optic Network

Active Member

Contact Us

[China]

Address: Room 1101,Originality Building B3, NO.162 Science Avenue,Science Town,GuangZhou

Contact name:SU

Guangzhou V-Solution Telecommunication Technology Co., Ltd.

1GE 3FE Wifi FTTH EPON ONU Modem For Fiber Optic Network

Country/Region	china
City & Province	guangzhou
Categories	Radio & TV Broadcasting Equipment

Product Details

V2804REW Epon Onu 1GE + 3FE + Wifi FTTH EPON Modem For Fiber Optic Network

Product Description

V2804REW is based on mature and stable, cost-effective EPON/GPON technology, high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of IEEE802.3ah and ITU-TG.984.x , China Telecom EPON/GPON equipment technical requirements and other specifications.

V2804REW with 1GE+3FE+WiFi ONU meets telecom operators FTTO (office), FTTD (Desk) ,FTTH(Home) broadband speed, SOHO broadband access, video surveillance and other requirements to design an EPON/GPON Gigabit Ethernet products.

1GE + 3FE + Wifi EPON ONU

Key Features

Advanced L2 features QinQ VLAN & QoS support.
Support NAT, Firewall function.
Support Console/ Telnet/ NMS management interface for ease of operation and maintenance.
Support 2K MAC address table.
Fully compatibility with OLT based on Broadcom/PMC/Cortina chipset.
Advantage traffic management
Advanced Dynamic Bandwidth Allocation (DBA)
The WAN port supports bridge or router mode.
Plug and play, integrated auto detecting, auto configuration, and auto firmware upgrade technology.
Full compliance to IEEE 802.3ah specification & OAM function.
Support rich VLAN, DHCP Server and IGMP snooping multicast feature.

Application

Specifications

EPON/GPON mode	Dual Mode , Can access EPON/GPON OLTs(HUAWEI,ZTE,FiberHome, etc).
Software mode	Bridging and Routing Mode.
Layer2	802.1D&802.1ad bridge,802.1p Cos,802.1Q VLAN.
Layer3	IPv4/IPv6 , DHCP Client/Server , PPPoE ,NAT , DMZ ,DDNS.
Multicast	IGMPv1/v2/v3 , IGMP snooping.
Security	Flow & Storm control, Loop Detection.
WiFi	IEEE802.11b/g/n (TX power:17dBm/16dBm/15dBm),Up to 300Mbps Authentication : WEP/WAP-PSK(TKIP)/WAP2-PSK(AES).
Firewall	Filtering Based on ACL/MAC/URL.
O&M	WEB/TELNET/OAM/OMCI, Support private OAM/OMCI protocol and Unified network management of VSOL OLT.

Indicators

LED	Mark	Status	Description
Power	PWR	On	Device is powered up.
Power	PWR	Off	Device is powered down.
Optical signal loss	LOS	Blink	Device does not receive optical signals.
Optical signal loss	LOS	Off	Device has received optical signal.
Registration	REG	On	Device is registered to the PON system.
		Off	Device is not registered to the PON system.
		Blink	Device is registering.
Interface	LAN1~LAN4	On	Port is connected properly.
		Off	Port connection exception or not connected.
		Blink	Port is sending or/and receiving data.
Wireless	WiFi	On	WiFi turned on.
		Off	Device is power off or WiFi turned off.
		Blink	WiFi data transmission.
WAN	WAN	On	WAN is up
WAN	WAN	Off	WAN is down
Pair	Pair	On	WPS client is connected. ( LED turn off after 5 minutes of successful connection)
		Off	Does not use WPS or WPS client is connected. ( LED turn off after 5 minutes of successful connection)
		Blink	WPS client is connecting.