MOSFET Motors PLC Transistor Module 8 Road Status Indication For Each Input

MOSFET Motors PLC Transistor Module 8 Road Status Indication For Each Input

The PLC output amplifier board converts the low-power control signal into a larger power output control signal to control the motor, contactor, solenoid valve, etc.
PLC output amplifier board product features:
1 . The advantages of simple wiring, easy installation, small footprint, long service life, etc., intermediate relay ideal replacement products; 2 .  Microsecond turn-on and turn-off time, one thousandth of the relay, no contact switch, fast and frequent work without affecting the life; 3 . 8-channel transistor output, 24V DC power supply, output current 6A per channel, supporting use with PLC; 4. With photoelectric isolation parts, strong anti-interference ability, protection of PLC output contacts, increase PLC life; 5. Suitable for driving large loads, with good compatibility with both resistive and inductive loads, such as solenoid valves, contactors, work lights, small motors, etc.; 6  Beautiful appearance, safe and reliable, easy installation of standard guide rails;

This board is used together with PLC to protect the PLC from isolation. It is used to output the PLC to the transistor. After the output, this board is used to amplify the load power and then drive the solenoid valve and other loads to protect. It is recommended that the output of the transistor control the inductive load. Use this board protection, so as not to burn plc output points worth more than gain, each road has a corresponding indicator, long life

PLC amplifier board is to amplify the PLC output signal, including voltage and current, such as transistor output PLC output current is generally only about 0.6A, if you want to control the DC fan, DC motor current is not enough, you need DC output amplifier board, so that The output current reaches 5-10A or even more, and it can drive DC fans, DC motors, etc. Another example is that the PLC output load of the transistor output is generally 0-36V. If you want to control a 110VAC or 220VAC load, you need an AC output amplifier board.

♦ Features

-- Standard DIN rain mounted-- Status indication for each input -- Special circuit for self test and anti-interference-- High quality MOSFET with large load and excellent stability

♦ Typical Applications

• Micro-controller • PLC control • Servo System

• Electro-magnetic valve • DC Motors

• Home intelligent control

♦ Technical data