Active Member
|
[China]
Address: No.15126 Century Avenue, Room 1-1612, Building 1, High Tech Zone,Jinan,China
Contact name:Stefanie Li
Jinan Should Shine Didactic Equipment Co., Ltd. |
|
|
ZM8134 Gas Absorption Column Educational Equipment Fluids Engineering Training Equipment
Description
Absorption is used to remove one or more gaseous components from a gas flow using a solvent.First of all, a CO2 and air gas mixture is produced. It is possible to adjust the mixing ratio using valves. The flow rates of the gas components are displayed.
A compressor delivers the gas mixture into the lower section of the absorption column. In the column, part of the CO2 is separated in the counterflow with the solvent. Water is used as the solvent. The CO2 is absorbed by the downward flowing water. To separate the absorbed CO2, the charged water is then fed from the lower section of the absorption column into a desorption column. As the pressure is reduced and the temperature is increased, the solubility of the CO2 falls. A heater heats the water. A water jet pump generates negative pressure in the desorption column and causes the CO2 gas to be emitted from the water. A pump then delivers the regenerated solvent back into the absorption column.
The water temperature can be controlled. Flow rate, temperature and pressure are continuously measured. The two-section column is equipped with connections to determine the pressure losses. The pressure loss in the respective sections can be displayed via two U-tube manometers. To evaluate the success of the process, the trainer includes outlets for taking gas and liquid samples. The gas samples can be analysed using the hand-held measuring unit supplied.
Specification
Technical data
Absorption column
height: 2x 750mm, inner diameter: 80mm
Desorption column
height: 750mm, inner diameter: 80mm
2 pumps (absorption/desorption)
max. flow rate: 17,5L/min
max. head: 47m
1 pump (cooling)
max. flow rate: 29L/min
max. head: 1,4m
Compressor
max. positive pressure: 2bar
max. flow rate: 39L/min
Refrigeration capacity: 1432W at 5/32°C
Refrigerant: R513A, GWP: 631
filling volume: 600g
CO2-equivalent: 0,4t
Measuring ranges
flow rate:
0,2…2,4Nm3/h (air)
50…600L/h (solvent)
0,4…5,4L/min (CO2)
temperature: 1x 0…80°C, 2x 0…60°C
pressure: 1x 0…2,5bar, 1x -1…0,6bar
differential pressure: 2x 0…250mmWC
CO2-content: 0…100vol%
230V, 50Hz, 1 phase
230V, 60Hz, 1 phase; 230V, 60Hz, 3 phases
UL/CSA optional
Dimensions and weight
LxWxH: 1920x790x2300mm
Weight: approx. 290kg
Required for operation
CO2 gas cylinder with pressure reducing valve
water connection, drain
Product Details and Warranty
We supply suitable spare pats according to experiment requirement, our products take aluminum structure, A4 paper dimension aluminum and plastic hanging box structure.
We supply 3 years warranty time.
Packaging & Delivery
Package details: plastic film+ plastic foam + plywood box with pallet, and for equipment dimension less than 1CBM, we supply plastic film+ plastic foam+ fine carton.
Arrange delivery within 45 days upon receipt of payment.
Please see below photo for detailed package.
Training Room Photo
Company Information
We supply professional educational training equipment and technical teaching equipment, which has been widely applied in Engineering Universities, Polytechnics, Technical Institute, Vocational Schools as well as Industry workforce Development Programs and Training Center. Our products allow students to learn and experiment through valuable hands-on experience, and the technology covered by our training equipment provides knowledge, experiments and didactic skills development that are of critical importance to today´s and tomorrow´s careers.
Photo for Clients Visiting Factory
Service
We supply supply7*24 hours service, customer design service, OEM service, buyer label service. With professional engineers team and sales team, we assure you good product quality.
Certificate
Our products takes ISO9001 product management system.
| No. | Feature Name | Details |
| 1 | Customer design | Yes |
| 2 | Warranty | 1 year, 2 years, 3 years or 5 years according to client requirements |
| 3 | Package | Plastic film+ carton+ Fine plywood |
| 4 | Products standard | International didactic equipment standard |
| 5 | Application range | Educational equipment for university, college, vocational training centers |
| 6 | Company philosophy | Supply best quality Chinese products to the worldwide schools. |
| 7 | Self owned brand | Shouldshine, SSEDU, JSS. |
| 8 | Production time | From 10 days to 60 days according to different items |
