Laboratory Solid Liquid Extraction Equipment Didactic Hydrodynamic Trainer

ZM7206 Didactic Equipment Hydrodynamics Laboratory Solid- Liquid Extraction

1. Product Overview

Extraction is a more efficient, selective, and cost-effective method that can replace separation methods such as distillation, evaporation, and membrane technology. Applications of this method include obtaining oil from oilseeds or leaching metal salts from ores.

The solid-liquid extraction experimental platform uses a solid-liquid extraction (leaching) method to separate the solid mixture. Solid-liquid extraction is the use of extractants to remove soluble components from solids.

The test scope includes the following areas:

Familiar with the basic principles of solid-liquid extraction

Prove that solid-liquid extraction is a continuous and discontinuous process

Study of single, two and third processes

Effect of extractant flow and temperature on extraction process

Effect of extraction material mass flow rate and carousel speed on extraction process

1.1 Instructions for use

This unit can be used for training in the field of thermal processing and instrument manufacturing. It is designed for training and is not suitable for industrial use.

1.2 Product parameters

Dimensions (LxWxH): 1360 x780x 1900mm mm

Weight: <180Kg

Power supply: single-phase AC230V 50Hz

2.2 Features

The operation of the extraction training device is based on the countercurrent principle. This method is used, and the concentration gradient serves as the driving force for mass transfer. That is, the fresh extractant is fed into the rotary extractor to extract the extraction material. The rotary extractor rotates slowly above the perforated base, and the material to be extracted is continuously fed into the rotary feeder unit through the screw conveyor. In the unit, the extractant is sprayed, and the extractant valve can be selected for single-stage, two-stage or three-stage Continuous operation to extract materials, the leached extraction residue falls into the designated container after one rotation of the feeder. The interrupt mode can stop the rotary extractor. Three pumps can be used to transport the extractant from the extractant container, and their speed can be adjusted individually for each stage. During the working process, at least one of the three process pumps is turned on, and the exhaust pump will automatically start, and then the extraction liquid is transferred to the designated container. Using a heater with temperature adjustment can adjust and display the temperature of the extractant at the relevant stage. Each stage is equipped with a conductivity sensor to monitor the separation process. All measured values ​​can be displayed using the software.

2.3 Process description

The unit (stage 1) is sprayed with fresh extractant, and the material extracted from this unit is then discharged into a designated container. The first two units (second stage) are sprayed with extractant from the first stage. The two units before the second stage constitute the third stage. The third stage is sprayed with the extractant discharged from the second stage. Therefore, the material to be extracted is completely extracted in the influenza unit. One unit is used for loading materials, one unit is used for emptying, and one unit is empty. After the first extraction experiment reached a steady state, data acquisition was meaningful only from the second extraction experiment. By adjusting the rotation speed, the residence time of the extracted material can be changed.

2.4 Software

Studying the solid-liquid extraction process on a PC can record data, which is beneficial to the study of the extraction process.

2.5.1 System requirements for software installation

• 250 MB of available hard disk space.

• CD-ROM drive.

• Graphics resolution 1024 x 768.

• USB1.1 or above.

• Operating system Windows 7

5. Experiment

5.1 Preparation of extraction materials

5.2 Discontinuous extraction experiment

5.3 Effect of number of stages on extraction performance

5.4 Effect of extractant temperature on extraction performance

5.5 Effect of extractant flow rate on extraction performance

 
Product Details and Warranty
We supply suitable spare pats according to experiment requirement, our products take aluminum structure, A4 paper dimension aluminum and plastic hanging box structure.
We supply 3 years warranty time.
 
Packaging & Delivery
Package details: plastic film+ plastic foam + plywood box with pallet, and for equipment dimension less than 1CBM, we supply plastic film+ plastic foam+ fine carton.

Arrange delivery within 45 days upon receipt of payment.

Please see below photo for detailed package.

Training Room Photo

Company Information

We supply professional educational training equipment and technical teaching equipment, which has been widely applied in Engineering Universities, Polytechnics, Technical Institute, Vocational Schools as well as Industry workforce Development Programs and Training Center. Our products allow students to learn and experiment through valuable hands-on experience, and the technology covered by our training equipment provides knowledge, experiments and didactic skills development that are of critical importance to today´s and tomorrow´s careers.

Photo for Clients Visiting Factory

Service

We supply supply7*24 hours service, customer design service, OEM service, buyer label service. With professional engineers team and sales team, we assure you good product quality.

Certificate
Our products takes ISO9001 product management system.