ZM9103 Escalator Training Equipment Teaching Equipment Didactic
Equipment
1. Overview
Elevator electrical skills training assessment experiment device is
for each big, technical secondary school universities, vocational
school of electrical, automation or related major, social
electrician training, maintenance electrician identification of
various (station), and other units of electrical control of PLC
teaching, evaluation and development, can be used for classroom
demonstration, the elevator electrical control the original
rational operation and experiment practice. Training device for
hidden set up dozens of circuit fault, the students with the aid of
fault principle diagram analysis and judgment, comprehensive and
real knowledge of elevator electrical fault and eliminate, is an
ideal equipment, skills training assessment of real significant
teaching effect.
2. Technical data
1. Input power: three-phase four-wire (or three-phase five-wire)
AC380V plus or minus 10% 50Hz
2. Total machine capacity: < 8kVA
3. Lifting height: 2000mm
4. Control mode: PLC+ frequency conversion self-starting control.
5. Monitoring system: real-time monitoring of voltage and current
conditions.
6. Fault module: with 30-bit common fault simulation setting
function.
7. Safety protection: it has the protection function of grounding,
overload, overcurrent and leakage current, and it is safe in
accordance with national standards.
8. External dimension: 8000mm (length) * 1600mm (width) * 4200mm
(height)
9. Size of training table: 1680 * 750 * 1610mm
10. Auxiliary ladder size: 1400 * 600 * 2180mm
11. Installation structure: the training elevator is made of steel
structure, and the experimental bench is made of iron double-layer
sub-light striated spray structure, which is strong and durable.
3. Basic configuration of experimental equipment
1. Ac power supply: provide three-phase five-wire ac power supply
(AC380V) with over-current leakage protection measures.
2, personal safety protection system: laboratory bench type with a
current leakage protection device, or high voltage output circuit
in the control panel line if there is leakage phenomenon,
immediately cut off the power supply, ensure the experimental
personnel and equipment safety.
3. Test bench: there is a voltage and current monitoring meter
installed on the panel, which can observe the working state of the
elevator in real time and visually. It is made entirely of elevator
used in industry. The elevator is equipped with a complete and
detailed circuit schematic diagram, which is convenient to analyze
the working principle of the equipment and the line fault analysis
and elimination.
4, fault Settings: panel according to the different fault switch
configuration is equipped with 20-28, 29-32 for standby switch,
convenient random set elevator safety line fault in the teaching
process, and fully meet the needs of the teaching content changes.
5. Experimental table: the experimental table is built by
industrial standard aluminum profile. The profile surface is
electrooxidized, beautiful, generous and durable. The table is made
of high density board, with solid structure and beautiful and
generous shape. There are two large drawers for storing tools,
materials, etc.
4. Experimental items and main contents:
1. Let students be familiar with the working principle, structure
composition, structure and principle of low-voltage electric
appliances of sidewalk escalators commonly used in industry.
2. By analyzing the electrical schematic diagram, students can
grasp the safety protection and working form of the elevator
through the analysis of the schematic diagram; And through analysis
and measurement, find out the location of the fault point, deeply
understand the operation principle of the elevator.
3. Improve students' practical operational analysis ability and
improve their practical skills.
4. Through the analysis and elimination of elevator faults, the
recognition and understanding of common elevator faults are
completed.
5. Understand the programming principles and methods of PLC program
through the programming of mitsubishi PLC host.
5. escalator teaching simulation software
This software uses 3 DPDF virtual simulation technology, the 3 d
PDF combined with metadata, text, images, video, and form the
dynamic PDF documents (that is, to join the three dimensional
animation interactive PDF document), contains rich 3 d data. The
software interface is vivid and beautiful, easy to learn and easy
to use. It can enhance the interest of teachers and students in
teaching and learning, and deepen students' understanding and
application of knowledge. By means of 3d disassembly animation, 3d
assembly animation and simulated disassembly, the software vividly
shows the disassembly and assembly process of modules such as
ladder mechanism, truss structure and drive host. The following
functions can be implemented:
1. Virtual interactive disassembly animation is conducted according
to the order of mechanical structure, and each step has animation
and detailed disassembly text introduction.
2. The software can be free to rotation, scaling, translation, the
model of hidden, isolation, display, such as operation, is equipped
with rotary model, scaling model and moving model, cache selected,
isolating the selected, all display, full screen switch, button,
etc.
3. Software playback function: set the buttons of the first step,
the previous step, the whole play, the next step and the last step,
etc.
4. Basic knowledge and introduction of each mechanism of escalator
5. Animation demonstration of working principle of escalator
6. Virtual disassembly and 3d animation demonstration of escalator
steps.
7. Virtual disassembly and 3d animation demonstration of escalator
drive host.
8. Virtual disassembly and 3d animation demonstration of automatic
truss structure.
Arrange delivery within 45 days upon receipt of payment.
Please see below photo for detailed package.
Training Room Photo
Company Information
We supply professional educational training equipment and technical
teaching equipment, which has been widely applied in Engineering
Universities, Polytechnics, Technical Institute, Vocational Schools
as well as Industry workforce Development Programs and Training
Center. Our products allow students to learn and experiment through
valuable hands-on experience, and the technology covered by our
training equipment provides knowledge, experiments and didactic
skills development that are of critical importance to today´s and
tomorrow´s careers.
Photo for Clients Visiting Factory
Service
We supply supply7*24 hours service, customer design service, OEM
service, buyer label service. With professional engineers team and
sales team, we assure you good product quality.
Certificate
Our products takes ISO9001 product management system.
| No. | Feature Name | Details |
| 1 | Customer design | Yes |
| 2 | Warranty | 1 year, 2 years, 3 years or 5 years according to client
requirements |
| 3 | Package | Plastic film+ carton+ Fine plywood |
| 4 | Products standard | International didactic equipment standard |
| 5 | Application range | Educational equipment for university, college, vocational training
centers |
| 6 | Company philosophy | Supply best quality Chinese products to the worldwide schools. |
| 7 | Self owned brand | Shouldshine, SSEDU, JSS. |
| 8 | Production time | From 10 days to 60 days according to different items |
