Jinan Should Shine Didactic Equipment Co., Ltd. |
|
ZM6148 Refrigeration Training Equipment Electrical Connection of
Refrigeration Compressor
1. Technical Description
The wiring of electrical components for the start and operation
of refrigerant compressors is a typical task in the field of
refrigeration.
Safety aspects also play an important role. With this
knowledge and these skills can be acquired. All components are
operated and tested with mains voltage to provide high
relevance for practice.
The electrical components for the start and operation of the
refrigerant compressor are arranged clearly visible. The
electrical connection of the individual components is made
with cables via the lab jacks. The
components are e.g. the capacitor and start-up relay necessary to
start the motor. The circuit diagram on the front panel
enables the easy allocation of the individual components.
The refrigeration circuit with compressor and receiver enables
the checking of the pressure switches on the intake and
delivery side of the compressor. The pressure is set via
valves and the pressure switch tripped. Two manometers enable
the monitoring of the pressure curve. If one of the pressure
switches trips, the current supply to the compressor is
interrupted. The wiring and checking of other typical components of
the
safety chain, e.g. circuit breaker and automatic fuse, is also
carried out.
The well-structured instructional material sets out the
fundamentals and provides a step-by-step guide through the
experiments.
2. Learning Objectives / Experiments
- Read, understand, wire and test electric circuit
diagrams for refrigerant compressors
- Design and operation of electrical components of refrigerant
compressors
* start-up capacitor
* start-up relay
* overheat protection
* automatic fuse
* pressure switch
* thermostat
- Design and testing of a safety chain
- Representation methods in electrical engineering
* symbols
* circuit diagrams
Please see below photo for detailed package.
Training Room Photo
Company Information
We supply professional educational training equipment and technical teaching equipment, which has been widely applied in Engineering Universities, Polytechnics, Technical Institute, Vocational Schools as well as Industry workforce Development Programs and Training Center. Our products allow students to learn and experiment through valuable hands-on experience, and the technology covered by our training equipment provides knowledge, experiments and didactic skills development that are of critical importance to today´s and tomorrow´s careers.
Photo for Clients Visiting Factory