Active Member
|
[China]
Address: NO.3,Liuzhong Rd,Liucun,Yunpu inderstrial Zone,luogang district,Guangzhou,China
Contact name:Ken liu
Vikest Opto Electrical Co., Ltd. |
|
|
Product Introduction
10 / 100M adaptive Ethernet fiber optic transceivers, can be 10 / 100Base-TX twisted pair electrical signals and 100Base-FX optical signal conversion. It extends the network's transmission distance from 100 meters to 100 kilometers (single-mode fiber) from copper. Typical applications are Ethernet distance interconnections, such as the connection of a cell room to a metro. Because of the adaptive function, the switch does not require any settings when connected to the switch. New lightning protection function, to ensure the safety of the equipment.
Product Features:
Adaptive: With 10 / 100M rate adaptive, full / half duplex adaptive function.
Performance: In line with: IEEE802.310Base-T standard; IEEE802.3U100Base-TX / FX standard; IEEE802.3X standard
Port transmission rate: Optical interface: 100Mbps; RJ45 port: 10 / 100Mbps ；cross-line and direct line automatic identification
Network cable: 10 / 100Base-TX UTP Category 5 cable
100Base-FX: single mode fiber: 8.3 / 125, 8.7 / 125, 9/125 or 10 / 125μm
Transmission distance: 10 / 100Base-TX: 100 meters; 100Base-FX: 20KM
PWR: Power indicator
FX LINK / ACT: optical link connection / activity status indicator
TX LINK / ACT: electrical link connection / activity status indicator
FX100: Optical port speed indicator
TX100: Electrical port speed indicator
FDX: full, half-duplex indicator
Port configuration:
2 RJ4510 / 100Base-TX ports
1 SC / ST multimode / single-mode duplex connector
External power supply: 5VDC1A
Power consumption: <5W
Built-in power supply: 220VAC, -48VDC
Power consumption: <5W
Environmental requirements:
Operating temperature range: 0 ℃ ~ 60 ℃
Storage temperature range: -40 ℃ ~ 85 ℃
Relative humidity: 5% to 90%
