Active Member
|
[China]
Address: No.3 Weihua Road, Suzhou, China
Contact name:Carl
Suzhou WIDO Machinery Co., Ltd |
|
|
Cutting Metal Disc
I. Description
Abrasive cutting discs are the accessories for angle grinder machines. The material used for the disc, and its structure are the main factors which have an effect on the safety and reliability. VIDO metal cutting and grinding disc will satisfy all the demands about that. The material is aluminum oxide. It has the advantage of high durability and tensile strength. Here let's figure out the performance of this accessories.
II. Specification
| Item No. | Size | Qty/CTN | Item No. | Size | Qty/CTN | |
| WD71213100012 | 100x2 | 500 | WD71212180030 | 180x3 | 100 | |
| WD71213115012 | 115x1.2 | 500 | WD71212230030 | 230x3 | 50 | |
| WD71213125012 | 125x1.2 | 500 | WD71213305030 | 305x3 | 25 | |
| WD71213180016 | 180x1.6 | 200 | WD71213355030 | 355x3 | 25 | |
| WD71213230018 | 230x1.8 | 100 | WD71213405030 | 405x3 | 25 | |
| WD71213100030 | 100x3 | 200 | WD71213305040 | 305x4 | 25 | |
| WD71212115030 | 115x3 | 200 | WD71213355040 | 355x4 | 25 | |
| WD71212125030 | 125x3 | 200 | WD71213405040 | 405x4 | 25 |
III. Feature
1. Thin cutting disc with 2 levels glass fiber grid, safe and reliable
2. Abrasion loss is lower, high cutting efficiency
3. Run-out tolerance is lower, better balance, low vibration
| size | Cutting material | Cutting times or Grinding time | VIDO grinding or efficiency | Some top brand grinding or efficiency | VIDO run-out tolerances | Some top brand run-out tolerances |
| 115x3x22.2mm | Ø12mm steel | 20 | ≤4mm | ≤5mm | ≤0.5mm | ≤0.6mm |
| 400x3x25.4mm | Ø25mm steel | 10 | ≤8mm | ≤8mm | ≤1.2mm | ≤1.2mm |
| 100x1.2x16mm | Ø12mm steel | 20 | ≤4mm | ≤5mm | ≤0.5mm | ≤0.6mm |
| 115x1.2x22.2mm | Ø12mm steel | 20 | ≤4mm | ≤5mm | ≤0.5mm | ≤0.6mm |
| 115*6*22.2mm | 45 # steel plate | Grinding 10min | ≥17g/min | ≥13g/min | ≤0.5mm | ≤0.6mm |
| 180*6*22.2mm | 45 # steel plate | Grinding 10min | ≥23g/min | ≥17g/min | ≤0.8mm | ≤0.8mm |
| 230*6*22.2mm | 45 # steel plate | Grinding 10min | ≥25g/min | ≥18g/min | ≤1.0mm | ≤1.0mm |
IV. Application
It can be used for cutting ordinary metal, carbon steel, steel alloy, weld seams, etc.. It is recommended to use with the VIDO angle grinder of the same size.
Every original disc from VIDO is of well reliability and security.
