1.8xHDMI source devices matrix switched to 8xCAT 5e/6 Extender output devices
2.50M over CAT6,with remote receiver before HDTV
3.CEC pass through
4.3D support/HDC 2.0 compliant
5.Deep Color 36-bit/48-bit,Full HD 1080P/120Hz
6.Super IR&Rs 232 control system,IR transport channel can be forward or backward per your installation
7.External and internal EDID settings
8.-HD/ True HD/LPCM7.1/
9.Compatible with HDC and DVI signals
Packing Included:
When first unpacking your HDMI Matrix over UTP,please check to see if the following item included:
1. One HDMI Matrix over UTP
2. Power supply
3. User manual
4. The remote control
5. HDMI receiversx8
Operation:
1. Connect the signal source (such as HD-DVD,PS3,STB) with HDMI input interfaces.
2. Connect the display devices (such as HD-LCD,HD-DLP) with HDMI output interfaces.
3. This device is powered by an external power supply (included).
Specification:
HDMI version | HDMI 3D |
Support HDMI resolution | 1080P/1080i/720P/576P/576i/480P/480i |
Support video color bit | Deep color 24bit/360bit |
Support audio format | LPCM/7.1/DSD |
Input video signal | 5.0VoltsP-P |
Output cable distance | ≤20m 24AWG Cable |
Input cable distance | ≤20m 24AWG Cable |
Data transfer speed | 6.75Gbps |
Operating Humidity range | 5 to 90%RH(No Condensation) |
Operating Temperature range | -15 to +55°C (5 to 131°F) |
Power adapter format | Input AC(50Hz.60Hz)100-240V |
Power Supply | DC 24V |
IR Backward Channel for Remote Control:
To use the IR backward channel you will need IR transmitters and IR receivers for each display you wish to control.
Warning
To reduce the risk of fire,electric shock or product damage:
1. Do not expose this equipment to rain,moisture,dripping or splashing liquids and make sure that no objects filled with
liquids,such as vases,are placed on or near the equipment.
2. Ensure the units are well ventilated.Do not install or place the units in a bookcase,built-in cabinet or other confined space.
3. Do not install near heat sources such as radiators, heaters, or fires.
4. Do not place sources of naked flames,such as lighted candles on the unit.
5. Clean this apparatus only with a dry cloth.
6. Unplug the power adaptor from the mains during thunder storms or when the equipment is not in use for a long time.
7. Position the power cord and units carefully to avoid accidents or damage to your equipment.
8. Only use the power adaptor supplied or one with the same rating.
9. Only use accessories specified by the manufacture.
10. Don not open casing there are no uses serviceable parts.Refer all servicing to qualified service personnel.