|
[China]
Trade Verify
Address: NO.32 West Taihu Road, Xinbei District, Changzhou, Jiangsu
Contact name:Jane
Changzhou Victory Technology Co., LTD |
|
Verified Suppliers
|
|
|
Product Description
How To Replace Alfalval Plate Heat Exchanger Plates For Heating And Cooling
Heat Exchanger Plates
1.Heat exchanger plate: a metal sheet pressed with corrugations, sealing grooves and corner holes, which is an important heat transfer element. Corrugations can enhance heat transfer, increase the strength and rigidity of thin plates, improve the pressure-bearing capacity of the heat exchanger, and promote turbulent flow of fluid on th
2. The heat exchanger plate is the core element of the plate heat exchanger. It is specially used to isolate the medium and perform heat exchange in the plate heat exchanger. It is an important part of the plate heat exchanger.
3. The heat exchanger plates are all stamped and formed in one go using extremely precise molds, with the same accuracy, so there is uniform metal point contact between the plates, ensuring that the plate heat exchanger can operate normally under higher pressure and can withstand the system pressure shock, etc.
And how to use a replacement plate:
To use a replacement plate for a plate heat exchanger, follow these steps:
Identify the Correct Plate: Ensure that the replacement plate is the correct size and type for your specific plate heat exchanger model. Refer to the manufacturer's documentation or contact them for assistance if needed.
Prepare the Work Area: Turn off the heat exchanger and isolate it from the system to prevent any accidents during the replacement process.
Remove the Old Plate: Carefully remove the old or damaged plate from the heat exchanger. Pay attention to how it is positioned and oriented for proper reassembly.
Install the Replacement Plate: Place the replacement plate in the correct position within the heat exchanger, aligning it with the existing plates and gaskets. Make sure it fits securely and snugly in place.
Reassemble the Heat Exchanger: Once the replacement plate is installed, carefully reassemble the heat exchanger by putting everything back together in the correct order.
Tighten Bolts: Securely tighten the bolts or fasteners to ensure that the plates are held firmly in place without any leaks.
Test the Heat Exchanger: After replacing the plate, perform a test run of the heat exchanger to check for proper functionality and ensure there are no leaks or issues.
By following these steps carefully and ensuring that the replacement plate is installed correctly, you can effectively use a replacement plate for your plate heat exchanger.
1. Stainless steel SUS304 SUS316L
Purified water, river water, food oil, mineral oil
2. Industrial pure titanium and titanium-palladium alloyTi tanium
and Pal ladium
Sea water, salt water, salt compounds
3. Hastelloy Alloy
Concentrated sulfuric acid, hydrochloric acid, phosphoric acid
4. Nickel
High temperature and high concentration caustic soda
| Brand | Model |
| Alfalaval | M3,M6,M6-D,M6M,M6MC,M10B,M10M,M15B,M15M,M15MC,M20M M20B,MX25B,MX25M,M30,TS6,TL6B,TS20,TL10B,TL10P,T20B,T20M,T20P,TL35B P16,P26,P36,AK20,JWP26,JWP36,M6MW,M10BW,MK15B |
| Material | Specification |
| Stainless Steel | SUS304 316 316L 310S 904 |
| Titanium and titanium-palladium alloy | TAi TAi-Pd |
| Hastelloy | C276 D205 B2G |
| Nickel | Ni200 Ni201 |
| Molybdenum | 254 |
Applacations
The application areas of heat exchanger plates are as follows:
1. Widely used for Hotels
2. Garment Shops
3. Building Material Shops
4. Machinery Repair Shops
5. Manufacturing Plant
6. Food & Beverage Factory
7. Farms, Restaurant,Retail, Food Shop
8. Printing Shops, Construction works
9. Energy & Mining, Food & Beverage Shops
Q&A
Q: Can I customize samples of heat exchanger plates?
A: Yes,we welcome sample order to test and check quality.
Q : Can you accept mixed batch of different heat exchanger plates
and OEM service?
A : Yes,we support mixed models and OEM service.
