High Accuracy 1800*3600mm 3-Deck 6~8 TPH Rotex Gyratory Screen Machine For Sieving Silica Sand

High Accuracy 1800*3600mm 3-Deck 6~8 TPH Rotex Gyratory Screen Machine For Sieving Silica Sand

Introduction of High Accuracy 1800*3600mm 3-Deck 6~8 TPH Rotex Gyratory Screen Machine For Sieving Silica Sand:

High Accuracy 1800*3600mm 3-Deck 6~8 TPH Rotex Gyratory Screen Machine For Sieving Silica Sand can meet your requirement of Large Screening Capacity and High Screening Accuracy for Fine Materials. This kind of gyratory sifter is also well known as the Rotex screen, Rotex screener, gyratory screen, gyratory screener, gyratory screening machine, gyratory separator etc.

  It can be widely used in screening silica sand, quartz sand, frac sand, sugar, salt, soybean, urea, calcined petroleum coke, coconut shell activated carbon etc.

Some Important Information You May Care About High Accuracy 1800*3600mm 3-Deck 6~8 TPH Rotex Gyratory Screen Machine For Sieving Silica Sand:

Advantages of High Accuracy 1800*3600mm 3-Deck 6~8 TPH Rotex Gyratory Screen Machine For Sieving Silica Sand:

1. Reciprocating Gyratory Motion:
Gyratory sifter with Gyratory reciprocating motion provides efficient distribution, stratification, and sifting resulting in higher yields and less rejection of good material.

2. Wearable and Reliable:

High quality and wearable structure featuring abrasion and corrosion resistant stainless steel.

3. Easy Operation:
Stable operation, high performance, reduce the screening costs.
The self-cleaning ball could avoid the mesh blocked.

4. Easy Sifter Mesh Replacing:
The mesh is fasten on the deck vis spring clamp, it is easy to change the mesh.

Working Principle of High Accuracy 1800*3600mm 3-Deck 6~8 TPH Rotex Gyratory Screen Machine For Sieving Silica Sand:

  The gyratory sifter could spreads the material across the full width of the screen surface, the material flow thickness will be thiner than other sifting equipment. The material will be easy to be sifting becasuse thiner the flow bed.

  The unique gyratory motion imparts a combination of actions to the material as it passes along the screen surface. It begins with a horizontal circular motion at the feed end, gradually diminishing along the length of the machine to an elliptical path, and finally to an approximate straight-line motion at the discharge end. There is no vertical component to this motion thus keeping the material in constant contact with the screen surface.

Installation of High Accuracy 1800*3600mm 3-Deck 6~8 TPH Rotex Gyratory Screen Machine For Sieving Silica Sand:

1. Cable Suspension:
  Gyratory screening machine can be cable-suspended from the four corners of the machine, thereby isolating out-of-balance screening forces from the surrounding structure. Accurate counterbalancing of the gyratory sifter makes this installation option possible. If the existing overhead structure is not suitable for cable suspension, or is structurally unable to support the cable-suspended unit, the gyratory separator can be suspended from a floor-mounted cable support cradle. As with conventional cable suspension, this option effectively isolates the horizontal out-of-balance screening forces, helping to minimize costs for new structures as well as permitting the use of older structures which might not otherwise support cable-suspended equipment.

2. Floor Mounting:
  The low transmitted forces of the Rotex Screeners counterbalanced drive allow the unit to be floor mounted in properly designed structures where some other types of equipment cannot. Mounting may be directly on the floor or on an elevated structural steel framework, the elevated position permitting drums or other equipment to be located under the machine. iBulk engineers can recommend a stand for any specific application.

               Cable Suspension Type                                 Floor Mounting Type

Technical Parameters of High Accuracy 1800*3600mm 3-Deck 6~8 TPH Rotex Gyratory Screen Machine For Sieving Silica Sand:

Application of High Accuracy 1800*3600mm 3-Deck 6~8 TPH Rotex Gyratory Screen Machine For Sieving Silica Sand:

1. Metallurgy, Mining industry: aluminum powder, copper powder, ore alloy powder, welding rod powder.

2. Food industry: sugar powder, starch, salt, rice, milk powder, egg -powder, sauce, syrup.

3. Chemical industry: resin, pigment, industrial medicine, cosmetic, coatings, medicine powder, granules.
4. Waste treatment: disposed oil, disposed water, disposed dye waste water, active carbon.
5. Medical industry: all kinds of medicine.

Contact: Ms. Magie

E-mail: sale@aarealmachine.com

             magiecn@gmail.com

WhatsApp/WeChat: 0086-15637361027

Website: https://www.aarealmachine.com