Active Member
|
[China]
Address: 289 Yellow River Road, Xinxiang City, Henan Province, China
Contact name:Wang
Henan Pingyuan Mining Machinery Co., Ltd |
|
|
Introduction
The screw conveyor is a kind of machine that uses the motor to drive the screw to turn and push the material to realize the purpose of conveying. It can be transported horizontally, obliquely or vertically. It has the advantages of simple structure, small cross-sectional area, good sealing, easy operation, easy maintenance and easy closed transportation.
Application
LSY series cement concrete screw auger conveyor is widely used in building materials, metallurgy, chemical, electric power, coal, machinery, light industry, grain and food industry, suitable for conveying powder, granular, small pieces of materials, such as cement, coal, grain, chemical fertilizer, ash, sand, coke, etc. should not be easily perishable, viscous, easy to agglomerate the material. Commonly seen in the food industry, these conveyors transport ingredients to and from mixers, ovens and vats and need to be sterile at all times. Therefore, they are commonly made of stainless steel, a smooth food grade metal that is less likely to contaminate edible ingredients than other materials and is easily cleaned.
Technical Parameter:
| LS screw conveyor specification & technical parameters | |||||||||||
| Type | LS160 | LS200 | LS250 | LS315 | LS400 | LS500 | LS630 | LS800 | LS1000 | LS1250 | |
| Diameter/mm | 160 | 200 | 250 | 315 | 400 | 500 | 630 | 800 | 1000 | 1250 | |
| Screw pitch/mm | 160 | 200 | 250 | 315 | 355 | 400 | 450 | 500 | 560 | 630 | |
| technical parameters | n | 112 | 100 | 90 | 80 | 71 | 63 | 50 | 40 | 32 | 25 |
| Q | 8 | 14 | 24 | 34 | 64 | 100 | 145 | 208 | 300 | 388 | |
| n | 90 | 80 | 71 | 63 | 56 | 50 | 40 | 32 | 25 | 20 | |
| Q | 7 | 12 | 20 | 26 | 52 | 80 | 116 | 165 | 230 | 320 | |
| n | 71 | 63 | 56 | 50 | 45 | 40 | 32 | 25 | 20 | 16 | |
| Q | 6 | 10 | 16 | 21 | 41 | 64 | 94 | 130 | 180 | 260 | |
| n | 50 | 50 | 45 | 40 | 36 | 32 | 25 | 20 | 16 | 13 | |
| Q | 4 | 7 | 13 | 16 | 34 | 52 | 80 | 110 | 150 | 200 | |
| n---Rotation Speed (r/min), Allowable Deviation < 10% Q---Capacity (m3/h), Filling Factor = 0.33 | |||||||||||
Selection Conditions
♦ Material to be processed: _ | ♦ Installation angle: ___° (if the installation is inclined) |
♦ Bulk density: t/m3 | ♦ lifting height: ___m (if there is slope angle) |
♦ Water content: % | ♦ Upstream equipment (what kind of equipment is used to feed the material): |
♦ Material temperature: °C | ♦ Downstream equipment (what kind of equipment is used to discharge the material): |
♦ Material is corrosive or not: (Yes or No) | ♦ Motor and gearbox: (Domestic or International brand or designated brand?) |
♦ Material is sticky or not: (Yes or No) | ♦ Construction material: (Carbon steel, SS304, SS316L or any special requirements) |
♦ Granule size of material: mm | ♦ Working environment: (indoor or outdoor) |
♦ Max. Granule size: mm | ♦ Working environment temperature: °C |
♦ Handling capacity: t/h | ♦ Working power supply: 3 Phase V Hz |
| ♦ Conveying length (distance between inlet and outlet): m | ♦ Quantity: sets |
| ♦ Installation of the conveyor is inclined or not: ___ (Yes or No) |
