PVC Conveyor Belt Steel Open Access On One Side Conveyor Covers

PVC Conveyor Belt Steel Open Access On One Side Conveyor Covers

Introduction

The rain cover of the conveyor is mostly made of color steel plate. The color steel plate is made of cold-rolled steel plate as the basic material. After degreasing, phosphating and chromate treatment, the heat of the front and the back is carried out under the protection of nitrogen. Zinc-plated, then apply a chemical conversion film that is easy to adhere to the primer, then apply an epoxy primer, and finally apply a chemical-resistant color finish. Such a color steel rain cover has light weight, beautiful appearance and good anti-corrosion performance, and can be directly processed.
It provides effective protection for mines, cement plants, power plants, paper mills, steel plants, sand and gravel yards, limestone fields, garbage disposal sites, ports, terminals, coal mines, and chemical industries.

Features and Advantages

1. No installation supports needed to brace covers on conveyor.

2. Rigid, corrugated covers are infinitely stronger than smooth designs.

3. Conveyor cover installation is not dependent on the location of idlers.

4. Overlapped edges double thickness increases conveyor cover strength.

5. Waves on surface to increase the support force, even can withstand a person.

6. Conveyor cover protects belt conveyor free from rain, dust, sunshine, wind etc.

7. Galvanized steel plate or fiberglass construction material can be optional.

8. Symmetrical design allows easy placement, quick installation and safe access.

9. Openable conveyor cover designed with hinges and self-tapping screws.

10. Full style hinges of the conveyor covers are protected with rust free coating.

Technical Parameter

Note: All the parameters are for reference only, we can design and manufacture as per your requirements.

Selection Conditions

♦Thickness: ___mm (PS. We can customize the thickness according to the customer’s requirement as well as provide the common thickness of 0.5mm, 0.6mm and 0.8mm)

♦For it working with the belt conveyor, we will very appreciate if you can provide us the corresponding layout drawing to normally install it;

If can’t, please refer to the following picture and provide the core parameters for a better quote and production: L ___mm; H ___mm; R ___mm

We mainly provide the following equipment: