|
[China]
Trade Verify
Address: B1, No.6, Yanhai Road, Chongtou District, Chang'an Town, Dongguan City, Guangdong Province, China
Contact name:Labtone
Labtone Test Equipment Co., Ltd |
|
Verified Suppliers
|
|
|
Vibration Test System For Battery Testing comply with UN38.3 IEC62133 standard
Vibration Test System Product Application
Vibration test is a process of exciting or shocking some part or device to observe its reaction in real environment. Vibration test is widely applied in many fields, ranging from circuit board, airplane, ship, rocket, missile, automobile, household appliance and other industrial products.Labtone can offer you the whole vibration and testing proposal, and provide you with the quality certificates of products according to national and international standards, including GB, GJB, UL, JIS, DIN, ISO, BS, MIL, IEC and ASTM standards.
Vibration Test System EV210 Specification
| Shaker Specifications VG1000-50 | |
| Peak Sine (Pk) | 1000Kg.f peak (10KN) |
| Random (RMS) | 1000Kg.f r.ms (10KN) @ISO5344 |
| Shock (Pk) | 2000Kg.f peak (20KN) @6ms |
| Usable Frequency | 2～3000Hz |
| Maximum Displacement (p-p) | 51mm (2inch) intermittence,46mm (1.8inch) continuous |
| Max. velocity | 2m/s |
| Max. acceleration | 100G (980 m/s2) |
| Vertical Load Support | 200 kg |
Body Suspension Natural Frequency (Thrust Axis) | Less than 2.5 Hz |
| Armature Diameter | Ф240 mm |
| Armature Weight | 10kg |
| Allowable partial force | 350.N.M |
Fundamental Resonance Frequency (Bare table) | 2,400 Hz (nom.) +/- 5% |
Load Attachment Points (Standard) | 16 stainless steel M10 Inserts |
| Stray Flux Density | ＜10gauss |
| Allowable partial force | 500.N.M |
| Shaker dimensions | 950mmL×700mmD×800mmH |
| Weight of Shaker | About 900Kg |
| Compressed Air Requirement | 0.7 Mpa |
More Vibration Test system model specifications: EV203-EV220
| Model | EV203 | EV206 | EV210 | EV220 |
| Vibration Generator | VG300/40 | VG600/50 | VG1000/50 | VG2000/50 |
| Frequency(Hz) | 2-2500 | 2-3000 | 2-3000 | 2-2500 |
| Max Exiting Force(kg.f) | 300 | 600 | 1000 | 2000 |
| Max. Displacement (mmp-p) | 40 | 50.8 | 50.8 | 50.8 |
| Max. Acceleration(g) | 100 | 100 | 100 | 100 |
| Max. Velocity(cm/s) | 200 | 200 | 200 | 200 |
| Payload(kg) | 120 | 200 | 300 | 400 |
| Armature Mass(kg) | 3 | 6 | 10 | 20 |
| Armature Diameter(mm) | φ150 | φ200 | φ240 | φ320 |
| Cooling Method | Forced Air Cooling | |||
| Shaker Weight(kg) | 480 | 920 | 1200 | 1600 |
| Shaker Dimension L*W*H(MM) | 800*565*670 | 890*750*850 | 890*750*850 | 1200*870*1100 |
| Power Amplifier | Amp3k | Amp6k | Amp12k | Amp22k |
| Cooling Method | Forced Air Cooling | |||
| Power Amplifier Weight(kg) | 250 | 320 | 350 | 500 |
| Power Amplifier Dimension L*W*H(MM) | 880*590*1125 | 880*590*1275 | 880*590*1275 | 880*590*1275 |
| Utility Requirements | 3-phase AC380V ±10% 50Hz | |||
| Aggregate Capacity(KW) | 9 | 20 | 25 | 35 |
Features:
Pre-Sales Service
1)Technical consultation: test method, laboratory planning and
suggestion.
2)Equipment selection: selection scheme, FAQ.
3)Product testing scheme.
4)Customer communication and progress report.
After-Sales Service
1)Technical training: operation of equipment, daily maintenance,
common fault diagnosis and troubleshooting.
2)Scheduled on-site service: Detection of problem as soon as
possible in order to eliminate equipment and anthropogenic hazards.
This is to ensure long term and stable equipment operation as well
as delivery of latest technical information.
3)Technical support: special paid services are provided according
to customer’s needs.
Product Detail:
