Sinusoidal Random Vibration Test System For 3 Axes Z X Y Direction Vibration Test

Sinusoidal Random Vibration Test System For 3 Axes Z X Y Direction Vibration Test

Vibration Test system Discription:

The purpose of vibration testing is to make a series of controllable vibration simulation in lab, no matter generated by natural or man-made vibration environment; such as waves, tidal flaps, wind, earthquake or rain and so on. It is to test if the product is capable of sustaining the vibration environment exerted from transporting or usage along its effective life cycle; and certify the standard of design & functional requirement of product. The value of vibration testing is to confirm the reliability of products and effectively screen out the bad products in factory; avoiding damages occurred at arrival; and to assess the failure analysis on the non-performing products; expecting to reach a high standard, high-reliability products. The vibration test stresses on the continuity and fatigue; and contributes to the understanding of product’s status under vibration circumstance in a normal environment; and avoids the product’s unpredictable damage caused under certain vibrating frequency for a long time.

Vibration Test System Capabilities

• Sine: 5,000 kgf (peak)
• Random: 5,000 kgf (rms)
• Shock: 10,000 kgf (peak)
• Frequency range: 2 Hz to 2500 kHz
• Maximum Velocity: 2.0m/s
• Maximum Acceleration: 100G (half sine) with a bare armature
• Maximum payload: 1000 kg
• Maximum displacement: Shock: 76 mm (p-p)

Test requirements and model selection guide

To choose a suitable vibration test system, the most important thing is to know the exciting force required to perform the vibration test. To evaluate and calculate the exciting force, the following test specifications should be known:

1. Clear Testing Requirements

2. Frequency (Frequency Range)

3. Maximum Acceleration

4. Maximum Displacement

5. Maximum Velocity

6. Specimen Weight and fixture weight

Vibration Test System Specification: