Active Member
|
[China]
Address: S&T Building, Baiwang Xin Industrial Park, Xili,Nanshan District, Shenzhen, China,518055
Contact name:Tim
Shenzhen Kinda Technology Co., Ltd |
|
|
Air jet loom Variable Frequency Drive Inverter 3AC 4KW 380V~460V
working principle
The air jet loom is a shuttleless loom that uses a jet stream to pull the weft yarn across the shed.
The working principle is to use air as the weft insertion medium, and the compressed airflow generated by the jet is used to pull the frictional traction force of the weft yarn, and the weft yarn is taken through the shed, and the jet generated by the jet is used to achieve the purpose of weft insertion. This weft insertion method enables the loom to achieve high speed and high yield. Among several shuttleless looms, the air jet loom is the one with the highest speed. Due to the reasonable weft insertion method, the weft insertion rate is high, the operation is simple and safe, the variety adaptability is wide, the machine material consumption is low, and the efficiency is high. High speed and low noise have become one of the most promising new types of cloth machines.
| Item | Technical Index | Specification |
| Input | Input voltage | 1AC 220~240V±15% |
| 3AC 220~240V±15% | ||
| 3AC 380~460V±15% | ||
| Input frequency | 50/60Hz±5% | |
| Output | Output voltage | 0~rated input voltage |
| Output frequency | 0~6000Hz | |
| Control Features | Frequency setting mode | Digital setting, analog setting, pulse frequency setting, serial communication setting, multi-step speed setting & simple PLC, PID setting, etc. These frequency settings can be combinated & switched in various modes. |
| Control mode | Torque control | |
| V/f control | ||
| Sensorless vector control | ||
| Operation command mode | Terminal control | |
| Keypad control | ||
| Serial communication control (Modbus) | ||
| Overload capacity | 150% / 120s, 160% / 60s, 180% / 10s, 200% / 1s. | |
| Frequency accuracy | Analog setting: maximum frequency ×0.05% | |
| Digital setting: 0.01Hz | ||
| Starting torque | 0.5Hz/180% (SVC); 1Hz/150% (V/f) | |
| Speed control precision | ±0.5% (SVC) | |
| Carrier frequency | temperature and load characteristics 0.5~16.0kHz, automatically adjusted according to | |
| Torque boost | Automatically torque boost; manually torque boost: 0.1%~30.0 | |
| V/f curve | Three types: linear, multiple point and square type (1.2 power, 1.4 power, 1.6 power, 1.8 power, square) | |
| Acceleration/deceleration mode | Straight line/S curve; four kinds of acceleration/deceleration time, range: 0.0s~65000s | |
| Braking unit | build-in standard. | |
| DC braking | DC braking when starting and stopping | |
| DC braking frequency: 0.0Hz~maximum frequency | ||
| Braking time: 0.0s~25.0s | ||
| Built-in PID | Built-in PID control to easily realize the close loop control of the process parameters (such as pressure, temperature, flow, etc.) | |
| Jog operation | Jog operation frequency: 0.0Hz~maximum frequency | |
| Jog acceleration/deceleration time: 0.1s~3600.0s | ||
| Simple PLC & multi-step speed operation | It can realize a maximum of 16 multi-step speeds running via the built-in PLC or control terminal. | |
| Automatic voltage regulation | Keep output voltage constant automatically when input voltage fluctuating | |
| Control Function | Torque control | Torque control without PG |
| Wobble frequency control | Multiple triangular-wave frequency control, special for textile | |
| Timing/length/counting control | Timing/length/counting control function | |
| Over-voltage & over-current stall control | Limit current & voltage automatically during the running process, prevent frequent over-current & over-voltage tripping | |
| Fault protection function | Comprehensive protections include over-current, over-voltage, under-voltage, overheating, default phase, overload, shortcut, etc., can record the detailed running data while failures happen. | |
| Input/output terminals | Output terminals | 2 open collector outputs, |
| 2 relay outputs, | ||
| 2 anaalog outputs, 0~10V / 4~20mA | ||
| Input terminals | Programmable digital input: 7 multifunctional inputs, one can be work as high speed pulse input.3 programmable analog input:AI1, AI2, AI3: 0~10V / 4~20mA | |
| Communication terminals | Build-in standard RS485 communication interface, support MODBUS-RTU communication protocol | |
| Human machine interface | LED display | Display frequency setting, output frequency, output voltage,output current, etc. Two lines display |
| Environment | Ambient temperature | -10~50°C, without direct sunshine. |
| Humidity | 90%RH or less (non-condensing) | |
| Altitude | ≤1000M: output rated power, >1000M: output derated | |
| Storage temperature | -20~60°C | |
| No | Items | KD330 |
| 1 | Reliable hardware | Only first-class componens are built-in. |
| 2 | Rubust design | IGBT current > 2 times of inverter output current |
| Capacitor > 50uF/A | ||
| 3 | PCB aging test | 100% test, 50°C, 12 hours. |
| 4 | Finished products aging test | 100% test, 50°C, 24 hours. |
| 5 | Loading test | 1. After manufacturing. |
| 2. After aging test. | ||
| Two times, 100% tested: | ||
| 6 | Grouped pulse testing | Without failure under 4500V (better EMC performance). |
| 7 | Smart start / stop mode | Acceleration / Deceleration time can be set as 0.0s, the inverter starts and stops the motor as fast as possible without failure. |
| 8 | Electrostatic testing | 1. Under contact condition -- without failure under 5000V. |
| 9 | 2. Noncontact conditions -- without failure under 10000V. | |
| High overload capacity | 150% / 120s, 160% / 60s, 180% / 10s, 200% /1s | |
| 10 | Big start torque | 0.5Hz/150% (V/f), 1Hz/150% (SVC) |
| 11 | LED display | >7,5kW, two lines parameters dispaly, convenient for commissioning and operating. |
| 12 | EMC filter | C3 level EMC filter build-in standardly |
