Active Member
|
[China]
Address: Building A4, No. 17 Courtyard, Jingshengzhongjie, Majuqiao, Tongzhou District, Beijing, China
Contact name:Teresa Wu
Beijing Zhongkemeichuang Science And Technology Ltd. |
|
|
Zkmc Q8 Model Automatic Inkjet Vertical Wall Printer 3d Effect Printing
Why us?
1. ZKMC Vertical Wall Printer 3d Effect Printing, not only has a friendly price, but also has a very good material quality, so consumers can use it without worry about of machine performance, quality and after sales services.
2. ZKMC direct to wall inkjet printer is a very popular type of product that consumers can trust. Its market is huge, and our company has certain position and strong influence in inkjet wall printer market.
3. ZKMC headquarter located in industrial high-tech zone of Beijing, the capital of China. Our company will fully support our buyers. As long as you buy ZKMC direct to wall printer, you can always contact us for lifetime for anything you don't know about the machine, and we will certainly help you whenever needed.
| Basic parameters | |
| Data transmission mode | USB |
| L*W*H (main body from ground) | Standard model: 70*31*239cm (the other models: 259cm, 329cm) |
| Printhead | Auto cleaning |
| Ink consumption | 8-12ml/m2 (less than USD1/m2) |
| Ink base color | Dual 4 colors (CMYK, CMYK), use special water based ink |
| Painting precision | From 720DPI, upto 2880DPI |
| Painting direction | Vertical |
| Painting speed | Multispeed adjustable, ~1-10m2/h |
| Voltage/power | 90-246V/380W,47-63HZ |
| Noise | Standy<20dBA, painting <50dBA |
| Storage/Operation | -10℃-35℃(59°F-95°F) |
| 10%-70% relative humidity, in non-condensation state | |
| Surface tracing | Hyperbolic banner sensors, two-way induction up and down |
| Machine configuration | |
| X axis guide | 5m rails |
| Y axis guide | Standard model: 219cm(the other models: 239cm, 309cm) |
| Z axis guide | 15cm |
| Display screen | 7’’ LCD, touch screen |
| Spay distance | 0.5-1cm |
| X axis effective stroke | 470cm |
| Y axis effective stroke | Standard model: 180cm (the other models: 200cm, 270cm) |
| Z axis effective stroke | 10cm |
| Synchro belt | 1pc |
| Drive rack | 5pcs |
| Net picture print height | Standard 1.8m (other models: 2.0m, 2.7m), unlimited width |
| Machine weight | 62kg |
| Lead rails weight | 10kg*5pcs |
| Applied wall | Inside & outside putty wall, latex wall, white wall, diatom mud wall, shell powder wall, wooden wall, paper, brick wall, canvas, etc. |
| Control configuration | |
| Ink container capacity | 400ml |
| Printhead cleaning | Auto |
| Pump test | Y |
| Stepper motor | Y |
| Level | Y |
| Painting mode | Bi-directional |
| Ultrasonic sensors | 2pcs |
| Performance configuration | |
| Language switch | Chinese, English |
| Auto skip blank | Y |
| Intelligent lifting | Support |
| Ink supply mode | Negative pressure auto ink supply |
| Color matching treatment | Auto |
| Ink use | Water based ink |
| Surface treatment | Water based varnish |
| Integrated voltage stabilizer | Y |
| Ink Heating | Y |
| Software | Professional Printer Maintop Software, ZKMC output software |
| Computer system | Windows XP, win7, win8, win10 |
| Remarks | The above data for reference only, may change due to continuous product/model upgrading. |
Advantages
1. Our print inks have an amazing 3D effect and could achieve gold, silver and jade effects. No other additional ink is needed to have these effects.
2. All of our machines are equipped with 2 ultrasonic sensors that automatically sense the flatness of the wall. So, our machine can print high quality picture on slightly curved wall.
3. It takes about 15 minutes for machine assembling. Machine is 62kg. The weight of the 5 pieces (1m/piece) of rail is 50kg. One people could operate the machine easily.
Contact: Teresa Wu
In charge of foreign trade
Telegram/WhatsApp/WeChat/Mobile: +8613011010380
Email: wallprinter@foxmail.com
