Hefei Hengcheng Industrial Equipment Technology Co., Ltd |
Verified Suppliers
|
|
Supply of Calcium Carbonate Vertical Mill - Limestone Micro Powder Production Line With High Grinding Efficiency
Description
HVM vertical mill
HVM vertical mill is a product with independent intellectual
property rights launched by Hefei Hengchengji, drawing on
successful foreign experience and continuously innovating through
the R&D team. This equipment is widely used in industries such
as cement, power, metallurgy, and chemical industry, and focuses on
non-metallic minerals, coal powder, and slag.
Vertical Grinding Mill Performance Characteristics
1. Due to the integration of crushing, drying, grinding, and
conveying, the system is simple and compact in layout, covering an
area of about 50% of the ball milling system, and can be arranged
outdoors, which can greatly reduce investment costs.
2. High efficiency: The grinding roller directly crushes and
crushes the material on the grinding disc, with low energy
consumption, saving 30% to 40% of energy compared to the ball
milling system. Less wear: The grinding roller does not come into
direct contact with the grinding disc during work, and the grinding
roller and lining plate are made of high-quality materials,
resulting in a long service life and less wear.
3. The hot air introduced from the outside into the mill directly
and repeatedly comes into full contact with powdered materials
inside the mill, with strong drying ability. It can save one dryer
and energy for the mill system. By adjusting the temperature of the
hot air, it can meet the requirements of materials with different
humidity levels.
4. Low vibration, low noise, and overall sealing of the equipment.
The system operates under negative pressure, without dust leakage,
and the environment is clean, meeting national environmental
protection requirements.
5. Equipped with an automatic control system, it can achieve remote
control and is easy to operate. It is equipped with a limit device
to prevent direct contact between the roller sleeve and the
grinding disc liner, avoiding destructive impact and severe
vibration.
6. Due to the short residence time of materials in the mill, it is
easy to detect and control product particle size and chemical
composition, reduce repeated grinding, and stabilize product
quality.
Vertical Mill Working Principle:
The main motor drives the grinding disc to rotate through a
reducer, and the material enters the vertical mill main machine
through a screw conveyor. It is then subjected to gravity and falls
to the center of the grinding disc. At the same time, the airflow
generated by the fan enters the main machine through the air inlet.
Under the action of centrifugal force, the material moves uniformly
from the center to the edge of the grinding disc. When passing
through the roller conveyor area on the grinding disc, it is
crushed by the grinding rollers, and large blocks of material are
directly crushed. Fine particles of material are compressed to form
a material layer for inter particle crushing. The crushed material
continues to move towards the edge of the grinding disc until it is
carried away by the strong air flow of the annular guide groove on
the periphery of the grinding disc. Coarse materials fall back into
the grinding disc due to their high gravity and are ground again;
Fine materials enter the powder selection system above the main
machine for classification as the airflow rises. Under the action
of the rotor blades of the classifier, coarser particles are
knocked off by the blades and returned to the grinding disc for
grinding. Qualified fine powder will be carried out of the powder
selection system with negative pressure air flow, enter the dust
removal equipment, and then collected by the powder collector to
form the finished product. In addition, other large particle
materials and debris will fall into the lower chamber of the mill
during grinding, and be scraped into the slag discharge port by the
scraper, effectively ensuring the quality of the finished product.
By adjusting the pressure of the hydraulic system, the grinding
roller pressure can be adjusted to adapt to different hardness raw
materials within a certain range. The rotor speed of the grading
system with multiple grading wheels can be adjusted and controlled,
and various qualified products with different specifications can be
obtained.
Technical Data
Model | HVM1250 | HVM1300 | HVM1500 | HVM1700 | HVM1900 | HVM2400 | HVM2500 | HVM2800 |
Grinding Table Median Diameter(mm) | 1250 | 1300 | 1500 | 1700 | 1900 | 2400 | 2500 | 2800 |
Capacity(t/h) | 6~9 | 9~13 | 15~20 | 24~32 | 26~35 | 36~45 | 45~58 | 56~80 |
Material Moisture | ≤5% | |||||||
Limestone Powder Fineness | 325 mesh (44um) 90% passed | |||||||
Main Motor Power(kw) | 110/132 | 185/200 | 250/280 | 355/400 | 450/500 | 450/500 | 710/800 | 1120/1250 |
Re:The data based on Mohs'hardness 3-4 material
Limestone Bond Index≤13kwh/t
Industry application of HVM vertical grinding machine:
Industries such as building materials, electricity, steel, energy,
heat, chemical, coal chemical, non-ferrous metallurgy, lime kilns,
mineral processing, etc.
The HVM vertical mill can process materials such as ferrite, slag,
slag, cement, diamond, iron ore, chromium ore, manganese ore, gold
ore, copper ore, aluminum ore, lead zinc ore, tantalum niobium ore,
polymetallic ore, nickel ore, bauxite, silicon carbide, titanium
dioxide, talc, bentonite, calcite, kaolin, graphite, mica,
wollastonite, feldspar, dolomite, pyrophyllite, quartz sand,
fluorite, limestone, organic silicon, lithium ash, shale, volcanic
ash, coal, etc.
Service
Engineering consulting
Based on our years of extensive engineering practice experience in
different industries, we can provide clients with professional and
multi-dimensional engineering consulting services related to
grinding systems and pneumatic conveying systems. From the early
stages of the project to the installation and debugging of the
production line, until stable production and compliance, we can
provide technical consulting services from multiple perspectives.
As long as customers have needs, we will provide them with
reasonable suggestions and superior solutions at a professional
level, meet their expectations, and meet their needs.
Engineering Design
We have a professional technical team composed of high-quality
talents such as experts, scholars, senior engineers, and master's
students who have won the National Science and Technology Progress
Award and participated in the formulation of relevant industry
standards. The team members have more than ten years of experience
in large state-owned design institutes in the industry, with rich
engineering practice experience and theoretical foundation. We can
provide professional and systematic engineering design services for
customers in various industries involved in powder grinding systems
and pneumatic conveying systems engineering, and provide a complete
set of solutions in the field of powder engineering. At present, we
have undertaken a large number of engineering design projects in
the domestic and foreign metallurgical industry (Vietnam, Congo,
Philippines, etc.), including limestone powder production and
pneumatic conveying engineering, coal powder preparation and
pneumatic conveying engineering, quicklime powder production and
pneumatic conveying engineering in the lime kiln industry, coal
powder preparation and pneumatic conveying engineering, cement
industry grinding system and conveying system renovation
engineering, etc. The designed engineering project equipment
selection is reasonable, the design scheme is scientific,
reasonable, concise, practical, and cost-effective, all of which
meet or exceed the expected indicators, and have received high
recognition and praise from users. The projects have won the
company a good reputation in the industry.
After-sale Service
We have a long-term service team on the production line, with good
technology and responsible after-sales service. All members have
more than 5 years of industry experience and are able to provide
timely, efficient, comprehensive and scientific after-sales service
to customers. We can provide customers with after-sales service
throughout the entire process of self engineering construction,
production line equipment installation, production line debugging,
until the production line meets the standard and reaches
production, solving various difficulties and miscellaneous problems
encountered by customers, and providing thoughtful, meticulous, and
comprehensive after-sales service.