Coal Vertical Mill 40 T/H Vertical Coal Mill Energy-Saving High
Production Low Consumption Coal Mill
Product Introduction:
Vertical mill is an ideal large-scale grinding equipment widely
used in industries such as cement, electricity, metallurgy,
chemical industry, non-metallic minerals, etc. It integrates
crushing, drying, grinding, and grading transportation, with high
production efficiency. It can grind block, granular, and powdered
raw materials into the required powder materials.
Product advantages
1. High grinding efficiency and low power consumption;
2. Low metal consumption per unit product;
3. The process flow is simple, and the functions of material
grinding, drying, and powder selection are completed
simultaneously;
4. Small footprint, compact layout, lightweight system equipment,
and low investment in civil construction.
Process Introduction
1. The raw coal is sieved through a grid screen in the raw coal
yard and falls onto a belt conveyor. After being removed by an
electromagnetic iron remover, the belt conveyor sends the raw coal
to the raw coal bin for storage.
2. After the pulverization system has been started, open the rod
valve at the bottom of the raw coal bin, start the sealing metering
tape to feed the coal vertical mill, and the raw coal enters the
coal vertical mill for drying and grinding.
3. The hot air or cement production line exhaust gas from the hot
air stove is drawn by the system fan and enters the coal vertical
mill. After sufficient heat exchange with the raw coal being ground
in the mill, the coal powder is picked up and sorted at the powder
selection machine. Coarse coal powder with poor fineness is re
ground on the grinding disc for grinding. Qualified coal powder is
collected by the explosion-proof gas box pulse dust collector with
the airflow and discharged into the coal powder bin through the
grid wheel.
4. The impurities in the raw coal, such as some coal gangue, metal
blocks, etc., are discharged from the mill through the air ring and
slag discharge port.
Parameter Table of Coal Vertical Mill
Specification | HVM1250 | HVM1300 | HVM1500 | HVM1700 | HVM1900 | HVM2200 | HVM2400 | HVM2800 |
Grinding table median diameter(mm) | 1250 | 1300 | 1500 | 1700 | 1900 | 2200 | 2400 | 2800 |
Capacity(t/h) | 10-15 | 10-15 | 14-22 | 20-28 | 26-35 | 35-45 | 45-56 | 70-90 |
Coal Moisture(%) | <15 |
Coal Power Fineness(%) | R0.08=2-12 |
Coal Power Moisture(%) | ≤1 |
Main Motor Power(kw) | 110/132 | 160/185 | 220/250 | 315/355 | 400/450 | 450/500 | 560/630 | 900/1120 |
Vertical grinding machines are composed of grinding discs, grinding
rollers, powder selection machines, pressurization devices,
monitoring devices, transmission devices, water spraying systems,
coarse powder external circulation systems, and other structures
1. Grinding disc: including guide ring, wind ring, material
blocking ring, lining plate, disc body, scraper plate, and lifting
device.
2. Grinding roller: The roller sleeve is a wear-resistant component
that requires sufficient toughness and good wear resistance.
3. Powder selection machines can be divided into three categories:
static, dynamic, and high-efficiency combination powder selection
machines
4. Pressure device: hydraulic device, energy storage device.
5. Monitoring device: Rocker arm monitoring, vibration monitoring.
6. Transmission device: electric motor, reducer.
7. Water spray system: reduce temperature and stabilize material
layer.
8. Coarse powder external circulation system: elevator.
Engineering Cases
Engineering Design and Equipment Manufacturing Supply of HVM2800M
Vertical Pulverized Coal Preparation System
Processing material type: bituminous coal
Capacity: ≥ 80t/h
Product fineness: 200 mesh, 85% pass