Active Member
|
[China]
Address: BLOCK 64 FUMIN INDUSTRY ,PINGHU TOWN,LONGGANG DISTRIC ,SHENZHEN CITY
Contact name:LISA XIAO
SHENZHEN JOINT TECHNOLOGY CO.,LTD |
|
|
600kg Max Load VMC650 Vertical Machine Center Metal Mould Making Machine Tools
Quick details:
1. The use of Taiwan's high-speed, high precision, high rigidity spindle unit, axial and radial bearing capacity, the maximum speed of up to 8000rpm.
2. The spindle with the center of the inflatable structure, the
spindle quickly when the knife with the center of the high pressure
gas on the spindle cone to clean, to ensure the accuracy of tool
clamping and life.
3. X, Y, Z three guide rails, screw are used protective devices to ensure that the screw and rail cleaning to ensure that the machine drive and movement accuracy and life.
4. The machine outside the protection of the use of full protection structure design, easy operation, safe and reliable.
Product advantage:
1. The use of reliable centralized automatic lubrication device, timing, quantitative lubrication of the machine automatically point intermittent lubrication, according to the working conditions to adjust the lubrication time.
2. The use of Taiwan's professional manufacturers of 16 hats-type knife library, tool change accuracy, time is short, high efficiency, millions of times running test, meet the reliability requirements; with damping structure, can reduce the impact of exercise, The life of the magazine; pneumatic drive, easy to use, the shortest path tool change.
3. The use of oil and water separation device, can be collected to the majority of lubricants separated from the coolant to prevent the rapid deterioration of coolant, environmentally friendly.
4. The machine operating system using ergonomic principles, the operating box independent design, can rotate their own, easy to operate.
5. This VMC is suitable for the mechanical processing and mold making. And it can adapt to the processing requirement from rough machining to finish machining. It can also finish many working procedures like milling, drilling, tapping, boring etc.
Specification Of Vertical machine center VMC650
| Model | Unit | VMC-650 | ||
| Travel | X axis | mm | 650 | |
| Y axis | mm | 400 | ||
| Z axis | mm | 480 | ||
| Distance between spindle and table | mm | 80-560 | ||
| Working table | Table size | mm | 800*420 | |
| Max. Load of table | Kg | 600 | ||
| T slot | Pcs－mm-mm | 3-18-135 | ||
| Positioning accuracy | X/Y/Z axis | mm | 0.008/0.008/0.008 | |
| Repeated positioning accuracy | X/Y/Z axis | mm | 0.007/0.007/0.007 | |
| Spindle | Spindle rotation speed | Rpm | 8000 | |
| Spindle taper | BT40 | |||
| Diameter | mm | Φ150 | ||
| Rivet model | BT40 45° | |||
| Rapid feed | X/Y/Z axis | m/min | 10 | |
| Cutting feed | X/Y/Z axis | m/min | 8 | |
| Tool magazine | Umbrella type | Size | Tools | 20 |
| Too changing time (T-T) | Sec | 6 | ||
| Max. diameter/ length/weight of tool | mm | 100/200/8 | ||
| Max tool diameter (no tool adjacent) | mm | 180 | ||
| Arm type | Size | Tools | 24 | |
| Tool changing time (T-T) | sec | 3.5s | ||
| Max. diameter/ /length/weight of tool | mm | 80/200/8 | ||
| Max tool diameter (no tool adjacent) | mm | 150 | ||
| Total capacity of electric | KVA | 15 | ||
| Weight of machine | Kg
| 4200 | ||
| Dimension | mm | 2300*2270*2350 | ||
Standard Accessories:
Fanuc Controller system
8000Rpm spindle
Full enclosed cover
Spindle encoder position system
Three axis inner encoder feedback system
Auto lubrication system
Pneumatic system
RS 232 Interface
Operation unit
RS232 Interface +working light
Tool and tool box
Optional accessories:
Siemens controller or other controller system
Spindle oil coolant
Heat exchanger
Umbrella type tool magazine
Arm type tool magazine
Screw type auto conveyor
Chain type tool magazine
4 Axis rotary table
Ring spray spindle
https://youtu.be/PZr5ifrwn-I
