Guangzhou Kema Electronic Technology Co., Ltd. |
Verified Suppliers
|
|
2024 Popular Long Pulsed Mode Picosecond Laser Machine Q Switch Nd Yag Laser Tattoo Removal Equipment
Product Parameter
Product model | BR32 |
Laser power | 500W |
Rated power | 1200W |
Screen size | 10.4 inches |
Output mode | pulse output |
Laser type | solid laser (YAG) |
Spot area | 1-5mm (adjustable) |
Control method | touch control |
Total times of laser | not resettable |
Pulse width range | 500 picoseconds |
Energy | 10-1000mJ (decimal system) |
Wavelength | 532 nm,1064 nm,1320nm |
Working water temperature | 16-45 degrees |
Instrument size / Packing size | 32*50*75cm / 49*63*93cm |
Frequency | 1-10HZ Alarm |
temperature | 45°C (adjustable) |
Cooling system | water cooling + air cooling (24 hours work) |
Voltage | AC220V+10%15A 50-60HZ,110v+10%25A50-60HZ |
Working principle
Using the light blasting effect, the high-intensity laser effectively penetrates the epidermis and can reach the pigment clusters in the dermis layer. Because the energy has a very short time of action and the energy is extremely high, the pigment clusters will quickly expand and explode after absorbing the high energy in an instant. After the particles are swallowed by macrophages, they are excreted, and the pigment gradually fades and disappears.
Advantages
1. The rate of removing melanin is much higher than traditional
laser
2. Melanin removal speed is faster, much shorten the treatment time
3. Reduce the risk of melanin reactivation
Simersure pico laser advantage
1. 10.4 inch touch Screen Anti-UV glare, low failure rate, safe and secure
2. Control system Independently developed control system. best after-sale warranty. Different styles can be OEM.
3. Switching power supply MW Power switch Supply from TAIWAN Low
failure rate, safe and secure
4. High pressure diaphragm pump Low noise, high pressure, stable performance
Handles
1. 532 wavelength: It is effective for dark, reddish pigments and age spots.
2. 1064 wavelength: Wash eyebrows, tattoos and dark pigments,
remove moles,Shrink pores, whiten skin and lighten spots
Postoperative related matters
1. The skin is sensitive to heat after treatment, so you should avoid using hot water to clean the treated area when washing your face. You should use warm or cold water When washing, the action should be as gentle as possible, and do not rub hard.
2. At the moment when the strong light acts during treatment, a
large amount of free water on the skin is lost, so most patients
will feel that my skin is dry and dehydrated, so it is necessary to
replenish water after treatment.
3. During the recovery period, do not touch the water in the
treatment area, do not perform skin care, do not make up and
rubbing.
4. Strenuous exercise should not be carried out during the recovery
period, so as to avoid excessive sweating, causing skin infection
or delaying the repair process.
5. Apply ice compress or cold spray according to the severity of skin reaction after treatment.
6. Fasting photosensitivity food and drugs during treatment.
7. Crusted skin during the recovery period will usually fall off on
its own in about 7-10 days, and it cannot be peeled off by hand to
avoid pigmentation or scars.Pay attention to sun protection during
the recovery period and use parasols when going out.