CO2 Fractional Laser Lattice Laser With Wavelength 10600nm Light Guide Arm

High Quality CO2 Fractional Laser Lattice Laser Laser Wavelength 10600nm Light Guide Arm High Speed Optical Scanning

Product Parameter

Product Principle:

The lattice laser emits the laser with the wavelength of 10600nm and the focal spot with the diameter of 50um-80um to form the minimally invasive small holes with the diameter of about 120um and the depth of about 2- 4mm on the skin, so as to generate a certain amount of thermal peeling and appropriate thermal coagulation obvious thermal effect. At this time, the thermal effect bridges the normal tissues between the small holes after trauma, and the thermal effect generates collagen fiber contraction, which starts the skin wound repair mechanism to generate a large amount of collagen regeneration, and reconstructs the dermis frame structure, so that the skin becomes exquisite and smooth, wrinkles disappear, the skin is healthy and young, and a skin health ecological circle is created.

At this time, the wall-breaking effect is generated, and the absorption rate of nutrition reaches more than 90%, so that the effect of twice the result with half the effort is achieved.

Origin Of Products:

Lattice laser is the most concerned skin cosmetic technology in the global skin industry, and it is a minimally invasive treatment between invasive and non-invasive. Lattice laser therapy theory was first published by Dr. Rox Anderson, a laser medical expert from Harvard University in the United States, in 2004. Once published, it was immediately recognized by experts from all over the world and quickly applied to clinical treatment.

At present, there are two kinds of lattice lasers in the industry: glass tube laser and radio frequency tube laser. The glass tube laser can no longer meet the needs of skin reconstruction and the current treatment, and is no longer used in the world.

Product Advantage:

1. Slight epidermal damage, stimulates the proliferation and remodeling of large amount of collagen in dermis, with only slight thermal damage;

2.The laser uses the American coherent 60W laser, with the life calculated in ten thousand hours and the daily loss negligible.

3. Four modes are available:

(1). continuous mode;

(2). super pulse mode;

(3). lattice mode;

(4). private mode;

4. South Korea seven light guide arm, flexible operation, low laser loss, stable output, ensure the accuracy

5. Multiple functions are fully covered, and different operation heads are arranged for operating different parts

6. Fine light spot, stable and uniform energy output; the thermal effect between points is bridged, and the treatment effect is more stable.

Three Effect Of Lattice Laser:

1. Hot desquamation forms a hot puncture space on the skin and triggers the regeneration of inflammatory tissues.

2. A large number of new cells need enough nutrition, can be directly through the small hole in the skin transdermal drug delivery, equivalent to mesodermal therapy.

3. The thermal effect can make the relaxed fiber shrink to 1/3 of the original diameter and make the diameter thicker to achieve the effect of tightness.

Differences between rf lasers and glass tubes:

Thousands of pulses per second of the radio frequency laser are exactly the same as the peak power, and the pulse width power of each pulse number of the glass tube is different, high and low;

The service lives vary greatly, and the radio frequency tube laser is at least several times of that of the glass tube; The output energy of the glass tube laser is high and low because it is gas; The output power of the laser is the same for a certain time, the glass changes every time light is emitted; The radio frequency tube lase ensures that each light spot is alway balanced and consistent, and that focal spots of the glass tube are different; Sometimes the scanning of the glass tube often shows the defect of leakage point, with the scanning pattern tailing, unfocused focal spot, unstable spot pattern, etc.