Home Companies Shenzhen Wonsun Machinery & Electrical Technology Co. Ltd

High End Servo Motor Vehicle Barrier Gate Auto Parking System Drop Arm Barrier

Shenzhen Wonsun Machinery & Electrical Technology Co. Ltd

Contact Us

[China] country

Trade Verify

Address: 1st Floor, Zhigu, No. 2-10, South jinlong Avenue, Shahu Community, Biling Street, Pingshan District, Shenzhen, China

Contact name:Keira

Inquir Now

Shenzhen Wonsun Machinery & Electrical Technology Co. Ltd

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

High End Servo Motor Vehicle Barrier Gate Auto Parking System Drop Arm Barrier

Country/Region china
City & Province shenzhen guangdong
InquireNow

Product Details

Auto Parking System High-End Servo Motor Vehicle Barrier Gate
 
​WONSUN is leading brand in China for vehicle barrier gate system with good spare part, repairing and waranty support. Barrier gate can be integrated with car parking access control system or car park ticketing system. Boom barrier arm will be lifted up to grant access upon verification from control system. WONSUN car boom gate is compatible to most vehicle card access control and automated parking ticket system in China. WONSUN barrier gate design is optimized to offer reliable yet affordable solution for residential condominium, apartment, commercial building and industrial factory usage. 

 
 
Parameters:
 
NameBarrier GateApplicationParking System
Speed0.3s,0.6s,0.9s,3s,4sMax Boom Length6m
Power SupplyAC220V/AC110VRated Power50W
Motor Rotational Speed1400rpmProtection DegreeIP64
Working Temperature-40℃~85℃Humidity≤90%
Remote Control Distance ≤100mFeatureno clutch
Net Weight(complete)42.6KGNet Weight(machine core)22.1KG
CertificateCEBoom TypeRound boom
 

 
Functions & Features:
 
1.When Power off,gate automatically open,no clutch design,no human intervention.When power on,gate automatically reset,restore to the gate closing state,truly unattended,fire safety standards.If special requirement,manual operation is required when power off.Operating arm
open and close by hand also can be realized by setting up control board DIP switch,which ensure that the system can be used at anytime.
2.The use of Single Balance Spring device,good regulation,no noise,indefatigable,not easy to break,safe and reliable.
3.Avariety of input and output modes can be selected,normally open normally closed optional.
4.Arm opening angle can be adjusted from 60 to 90 degrees,10 degrees resolution,suitable for eaves prominent place to install

 
 

 
 Warranty:
1. Drive Motor is warranted against manufacturer’s defect for lifetime
2. Standard warranty for all components is valid for12 months from the date of delivery
3. This warranty does not include damages caused by:
a. Wear and Tear
b. Theft
c. Accidents
d. Act of God & Natural Disaster
e. Unstable power supply (i.e. inconsistent voltage or lightning)

 
FAQ:
 
1. When barrier finish closing, why does the arm open itself slowly?
 

the spring is too tight, you need release the spring a little, then test it again.
see whether the main crank touch the triangle tightly or not, if tightly, adjust it.
reset the balance position and the electrical limit switch.
 
2. Why does the controller panel operate with "Di Di Di" abnormal noises?
 
As for this, it means the resistance on controller board is broken, if you have professional tools to check,
then replace that broken resistance, if not, replace that controller panel.
 
3. Why does the barrier finish half operation of opening and closing?
 
If uses our controller panel, you only need to find resistance R37 on controller panel, and repalce it is ok.
 
4. When barrier closed, why is there a 5 degree angle of inclination?
 
the model is not good, and the gear doesn't fit each other tightly.
the barrier didn't adjust well, need to reset.
 
5. When barrier finish open, but it closes itself without any order control, what's the problem?
 
To check the loop cable first, because the loop cable maybe brokem
To check the motor sensor, if it is not set well, then reset it in the middle between two holes on sensor rod.
 
6. Why does the arm wave a lot when opening and closing?
 
The spring is very tight
The Screw touches the rubber absorption tightly, need to reset again.
 
7. Rubber linning installation suggestion:
 
It is good use for fast speed, like 0.6s, 1s, 1.8s and 3s.
The place with many vehicles come and go, like shopping center, carpark area.
 
8. Can you accept OEM/ODM order?
 
Absolutely, we are manufacturer of barrier gate, with 7 years researching and developing experience.

 
 
Contact us for pricelist and catalog:
Sue Zhang
Email:sue@wonsunbarrier.com
Skype:SueZhang729
Whatsapp:+86 158 7925 9831

































































Hot Products

Auto Parking System High-End Servo Motor Vehicle Barrier Gate ​WONSUN is leading brand in China for ...
IP65 24V DC Servo Motor Backup Solar Power Vehicle Barrier Gate Technical specifications: Model DZ...
Solor Energy Optional Auto Boom Barriers Serve Motor Barrier Gate With Two Fence Wonusn patented 138 ...
0.3S Fast Speed Vehicle Parking Barrier Gate Parking Lot Barriers With Serve Motor Applications: ...
Motor Cooling Fan Manual Release Vehicle Barrier Gate 2mm Cold Roller Steel Plate Functions & ...
Servo Motor Heavy Duty Road Barrier Gate 100% waterproof Internal RS 485 Data sheet Arm Length Max6M ...