Compressor AC System Auto 64500021903 For RollsRoyce Phantom For Bentley WXAA022

64500021903 Car Air Compressor For RollsRoyce Phantom MK7 For Bentley 6.7 WXAA022

Parameter :

Automotive air conditioning systems play a crucial role in maintaining a comfortable temperature inside vehicles, especially during hot summer months. The operation of these systems relies on a complex process involving several components working together to provide cool air to the cabin. Let's explore the general flow of how an automotive air conditioning system operates.

1. Compressor: The process starts with the compressor, which is driven by the vehicle's engine. The compressor is responsible for pressurizing the refrigerant gas, increasing its temperature and pressure.

2. Condenser: The high-pressure, high-temperature refrigerant gas then flows through the condenser, located at the front of the vehicle. The condenser is a heat exchanger that transfers heat from the refrigerant to the surrounding air. As the refrigerant cools down, it condenses into a high-pressure liquid.

3. Receiver/Drier: The high-pressure liquid refrigerant then flows into the receiver/drier, which serves two important functions. Firstly, it acts as a storage vessel for excess refrigerant. Secondly, it contains a desiccant to remove any moisture that may be present in the refrigerant, ensuring its purity and preventing the formation of ice crystals.

4. Expansion Valve: From the receiver/drier, the high-pressure liquid refrigerant enters the expansion valve. This valve acts as a restriction, causing a sudden drop in pressure. As a result, the refrigerant transitions from a high-pressure liquid to a low-pressure liquid and enters the evaporator.

5. Evaporator: The low-pressure liquid refrigerant enters the evaporator, which is usually located inside the vehicle's dashboard. As warm air from the cabin passes over the evaporator's coils, the refrigerant absorbs heat from the air, cooling it down and causing the refrigerant to evaporate into a low-pressure gas.

6. Blower and vents: The now-cool air is blown into the cabin by the blower fan, which is powered by an electric motor. The air is directed through the vehicle's vents, allowing occupants to feel the cooling effect.

7. Refrigerant cycle: The low-pressure refrigerant gas from the evaporator is then sucked back into the compressor, and the process repeats to maintain a continuous flow of cool air.

It's worth noting that modern automotive air conditioning systems also incorporate electronic controls and sensors to regulate and optimize the cooling process. These controls monitor factors such as cabin temperature, ambient conditions, and blower speed, adjusting the system's operation accordingly to provide maximum comfort and energy efficiency.

Overall, a typical automotive air conditioning system functions by compressing and circulating refrigerant through a series of components, cooling the air inside the cabin, and regulating the temperature to create a comfortable driving experience.

Compressor Pictures

Piston-Type Compressors

The automotive air conditioning compressor is a crucial component of the AC system, responsible for compressing and circulating the refrigerant. It consists of several key parts that work together to achieve effective cooling.

1. Compressor Housing: The outer shell of the compressor, designed to enclose and protect the internal components.

2. Compressor Pulley: A pulley attached to the front of the compressor, connected to the engine via a belt. It transfers power from the engine to drive the compressor.

3. Clutch Assembly: The clutch allows the compressor to engage and disengage as required. It consists of an electromagnetic coil, friction plates, and a hub.

4. Swash Plate: This component converts the rotational motion of the compressor shaft into a reciprocating or up-and-down motion. It is responsible for compressing the refrigerant.

5. Piston: Linked to the swash plate, the piston moves up and down within the compressor cylinder to compress the refrigerant gas.

6. Reed Valves: These one-way valves control the flow of refrigerant into and out of the cylinder. They prevent backflow and ensure efficient compression.

7. Oil Separator: Located within the compressor housing, it separates the refrigerant oil from the refrigerant gas before it leaves the compressor.

8. Shaft Seal: This seal prevents refrigerant from leaking out and contaminants from entering the compressor. It ensures the integrity of the system.

9. Control Valve: Some compressors have a control valve that regulates the flow of refrigerant based on the cooling demands of the vehicle.

10. Mounting Brackets: These brackets secure the compressor to the engine or chassis, keeping it stable and in the correct position.

Each of these components plays a crucial role in the operation of the automotive air conditioning compressor. Their proper functioning ensures efficient cooling and overall performance of the AC system in vehicles.