Home Companies Eberry Electric Co., Ltd.

Eberry ERM1 1p 2p 3p 4p Series Miniature Circuit Breakers Micro Moulded Case

Eberry Electric Co., Ltd.

Contact Us

[China] country

Trade Verify

Address: 66 pu nan Road, Yueqing Economic Development Zone, Zhejiang, China

Contact name:Wen

Inquir Now

Eberry Electric Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Eberry ERM1 1p 2p 3p 4p Series Miniature Circuit Breakers Micro Moulded Case

Country/Region china
City & Province zhejiang
Categories Battery Chargers
InquireNow

Product Details

Eberry ERM1 1p 2p 3p 4p series micro Moulded Case circuit breaker Mini Circuit Breakers

 

• Application Scope

- ERM1 series moulded case circuit breaker ( hereinafter referred to as the circuit breaker ),is suitable for occasional conversion and motor start ( Inm<=630A type and below )under the circuit of AC 50Hz/60Hz,rated insulation voltage of 690V(500V for ERM1-63),rated operational voltage of 400V and below and rated current to 1250A.The circuit breaker has protection function to avoid overload ,short circuit and under-voltage,for assuring the prevention from damage of circuits and power-supply devices . - The circuit breaker can be classified into three types of L (standard),M (moderate high breaking )and H (high breaking )according to the rated limit short circuit breaking capacity ( Icu).It has features of small volume ,high breaking and short flashover ,vibration resistance ,etc . - It can can be installed vertically (vertical assembly )or horizontally (horizontal assembly ).It has isolation function. - The circuit breaker conforms to requirements of IEC 60947-2 and GB14048.2 standards.

• Normal Working Environment

- Altitude<=2000m - Ambient temp: -5°C ~ +40°C - Able to tolerate the influence of salt mist and oil mist - Pollution level: 3 - Maximum gradient is 22.5° - In the medium without explosion danger and the medium has not enough corrosion to metal,to destroy the insulation gas and conductive dust. - In the place without invasion of rain and snow. - Installation category III.
• Protective Characteristics Motion performance of release - For power distribution
 
Rated operational current of release(A)
Thermal overload release(fiducial temperature 40°C)
 
Current action of electromagnetic release(A)
 
 
Remarks
1.05(cold state) Non-actuation time(h)
1.30In(thermal state)actuation time(h)
10<In<=63
>=1
<1
10In+-20%
Distribution protective type Notes:1250A for 7In+-20%
63<In<=100
>=2
<2
10In+-20%
100<In<=1250
>=2
<2
5In+-20%
7In+-20%
10In+-20%
Notes:Rated current is less than 160A and has no 5 In current magnetic release.
- For motors protection
Rated operational current of release(A)
Thermal overload release(fiducial temperature 40°C)
Current action of magnetic release(A)
1.0In(cold state)Non-actuation time(h)
1.20In(thermal state)actuation time(h)
1.50In(thermal state)actuation time(h)
7.20In(cold state)actuation time(h)
10<=In<=630
>=2
<=2
8min
6S<Tp<=20S
12In+-20%

 
 
 

 

 
 

Hot Products

Factory insulated Fixed 630A VS1 vcb Vacuum Circuit Breaker Intorduction: It is an indoor switchgear ...
High Voltage Electric supplier VBI-24 Vacuum Circuit Breaker vcb 24kv lateral poles for indoor ...
Eberry ERM1 1p 2p 3p 4p series micro Moulded Case circuit breaker Mini Circuit Breakers • Applicatio...
2P 800 Volt DC MCCB for Moulded Case Circuit Breaker Mini Circuit Breaker #detail_decorate_root ...
Mcb electrical miniature mini circuit breakers 1P 2P 3P 4P types Mini Circuit Breakers Application ...
Home use 3 pole 32A AC mcb moulded case 3p mccb Mini Circuit Breakers Application Scope - The ERB1...