DC112 Line Array System Top Quality Single 12-Inch Passive Line
Array
DC112 is a two-way line array speaker with high power and high
transient response. It provides a frequency range of
59Hz-20kHz(-10dB). With the processor, it improves the frequency
response line and subjective sense of the vocal. It brings the
ultimate experience to system engineers and tuners. DC112 consists
of a 75-core voice coil ferrite tweeter and a 12-inch Neodymium
cone low driver to constitute a large dynamic sound reinforcement
system.
DC112’s high driver uses a wide directivity horn and has a longer
range. It is beneficial to expand the wider mid-range and tweeter
directivity. It uses a Neodymium low driver with a 3-inch voice
coil and paper cone that are rigidly combined so that it has faster
transients and better control. Not only can improve the sensitivity
of the driver, but also can strengthen the low-frequency. The whole
speaker can reach the sensitivity of about 97dB with the DSP
optimized. So it enables the speaker to produce a peak sound
pressure level output of 129dB.
The cabinet is made of 15mm plywood, and the surface is made of
wear-resistant black matt paint. On both sides of the cabinet, two
handles are flush with the box and are installed on both sides of
the box for easy transportation. the back wiring board has 2 NL-4
four-pin sockets, with a connection way of 1+1-...Full Range,
2+2-pin. The rotatable LOGO is more suitable for the use of any
angle of the speaker. The black perforated iron mesh
sound-permeable gauze mesh effectively prevents moisture, and dust
and protects the speaker unit.
