Active Member
|
[China]
Address: 801,Block B-14,the First industrial of BAIHUA Community, Guangming street, Guangming, Shenzhen, Guangdong, 518107,China
Contact name:Michael
Shenzhen Bird UV Technology Co.,Ltd |
|
|
| UV LED SPOT CURING HEAD | ||||
| Model | Light Diameter | Focal distance | Intensity for 365NM(MW/CM2) | Cooling Method |
| LHFC084-03 | 3mm | 9MM | 10000 | Fan Cooling |
| LHFC084-04 | 4mm | 10MM | 9000 | |
| LHFC084-06 | 6mm | 17MM | 4000 | |
| LHFC084-08 | 8mm | 20MM | 2300 | |
| LHFC084-12 | 12mm | 30MM | 800 | |
| LHFQ084-03 | 3mm | 9MM | 10000 | Half Fan cooling |
| LHFQ084-04 | 4mm | 10MM | 9000 | |
| LHFQ084-06 | 6mm | 17MM | 4000 | |
| LHFQ084-08 | 8mm | 20MM | 2300 | |
| LHFQ084-12 | 12mm | 30MM | 800 | |
| LHS049-03 | 3mm | 9MM | 10000 | Nature cooling(L66MM) |
| LHS049-04 | 4mm | 10MM | 9000 | |
| LHS049-06 | 6mm | 17MM | 4000 | |
| LHS049-08 | 8mm | 20MM | 2300 | |
| LHS049-12 | 12mm | 30MM | 800 | |
| LHFB118-03 | 3mm | 9MM | 10000 | Nature cooling(L118MM) |
| LHFB118-04 | 4mm | 10MM | 9000 | |
| LHFB118-06 | 6mm | 17MM | 4000 | |
| LHFB118-08 | 8mm | 20MM | 2300 | |
| LHFB118-12 | 12mm | 30MM | 800 | |
| UV LED SPOT SYSTEM'S CONTROLLER | ||||
| Controller Model Name | UVEC-4II | |||
| UV LED curing heads' QTY | 1 - 4 PCS of Spot LED heads | |||
| 1 - 2 PCS of linear/area LED heads | ||||
| Dimension for UVEC-4II | 180L*100W*146H(mm) | |||
| Dimension for UVEC-4III | 156L*100W*163H (mm) | |||
| Terminal I/O | Input | Foot pedal & serial RS-232 signals | ||
| Output | serial RS-232 communication signals | |||
| Cooling method | Semiconductor cooling | |||
| Power setting | 0 – 100% | |||
| Time setting | 0 - 999.99 S | |||
| Radiation Mode | Fixed power | Constant power radiation | ||
| Step power | Step power radiation | |||
Advantages of UV LED Spot Light Source
1. Thermal radiation is small, the irradiating machine uses the luminescent part UV-LED power, the spectral wavelength is 365nm, no infrared light is emitted, so the surface of the irradiated product has no temperature rise.
2. High energy and high purity ultraviolet light is issued. The latest high energy UV LED is used to rapidly cure the UV glue and greatly improve the production efficiency.
3. To reduce the cost of consumables, the use time of UV LED can generally reach 30,000 to 40,000 hours, while the traditional LAMP system needs to replace the LAMP in about 2000 hours.
4. LED-UV spot light source adopts cable output, without optical fiber guide light. UV LED can reduce equipment cost and improve equipment utilization.
5. Energy saving and environmental protection, UV LED power consumption is low, and when used, no lamp tube is used to preheat, and it reaches 100% high power instantaneously, namely, out-of-the-box.
6. UV photoelectric conversion efficiency is high, and does not contain toxic mercury, also does not produce ozone, is a safer and more environmentally friendly alternative to traditional light sources.
7. The volume of the UV LED controller is about 1/8 of the volume of the traditional LAMP, which makes the installation of the equipment more simple. Small irradiation head design, because of fully consideration of the precise production space requirement, makes the equipment installation more convenient.
8. The equipment can be used in different process, according to the actual situation, the user can choose and match the extension cable.
9. Unique fan heat dissipation, fast heat removal of the chip, improving the stability of power output, extending the life of UV LED
Control model: UVEC-II , Lamp model :LHS049-06 and other models are widely in use in kind of auto dispersion glue machine. The customer including Intel, lumentum, Apple, BOE and Foxconn.
Standard configuration
Controller:1 set
LED head: 1 - 4 pieces
12V Power adapter for specific country: 1 piece
Cables: 2M/5M
Foot switch: 1 - 4 pieces
Anti-UV glasses: 1 pair
