Active Member
|
[China]
Address: No.1 modern service base, 5th floor, Huagongyuan Rd, Donghu high-tech Zone, Wuhan city, Hubei Province, China
Contact name:Alisa Ye
Wuhan UV LEDTek Co.,Ltd |
|
|
Fiber coating UV LED for Fiber drawing coloring high speed and high quality
Technical advantages of UV-LED:
UV-LEDs are five times more efficient than mercury lamps.
If UVLED is applied for optical fiber production in 2018, it can save RMB256 million. (It's the visible cost)
Invisible cost : Extracting the heat generated by the drawing tower area and maintaining the constant temperature of the cleanroom( 23-26°C & 50% RH);the high curing efficiency of UVLED peak intensity can increase the drawing capacity, but the heat generated by mercury lamp will cool the exhaust system, and the cost of consumables in the mercury lamp use process;
Fiber coating curing is a highly skilled process. In the fiber drawing tower, it is produced at a speed of 2km per minute. The UV curing process determines the quality of the fiber. Traditional curing methods consume a lot of electricity, generate a lot of heat, and have high maintenance costs. UV LED technology makes up for the traditional UV-cured shortboard, which is a new, energy-saving and efficient technology.
For every 1 centimeter of fiber produced, the LED UV lamp and the extraction system use approximately 0.5-0.7 degrees of power. We produced about 240 million core kilometers of fiber in 2018 in China, and the total power consumption will exceed 160 million kWh.
Compare with conventional UV lamp
1. For every 1 centimeter of fiber produced, the LED UV lamp and the extraction system use approximately 0.5-0.7 degrees of power.
2. We produced about 240 million core kilometers of fiber in 2018 in China, and the total power consumption will exceed 160 million kWh.
3. UV-LEDs are five times more efficient than mercury lamps.
4. If UVLED is applied for optical fiber production in 2018, it can
save RMB256 million(It's the visible cost).
5. Invisible cost : Extracting the heat generated by the drawing tower area and maintaining the constant temperature of the cleanroom( 23-26°C & 50% RH); the high curing efficiency of UVLED peak intensity can increase the drawing capacity; but the heat generated by mercury lamp will cool the exhaust system, and the cost of consumables in the mercury lamp use process;
UV LED Optical Fiber Curing Light Parameter:
Specification | Valid emitting area(mm ) | Illuminate distance(mm ) | Wavelength(nm ) | Luminous intensity(mW/cm2 ) |
uniformity
|
Luminous half Angle
|
Cooling method |
UVLED Spot Light Source | ＞φ10 | 350 | 365 | ＞400 | ＞90% | 1.7° | Nature convection |
| UVLED Area Light Source | 280x190 | 350 | ＞480 | ＞80% | 1.7° | Water cooling |
Technical advantages of UV-LED
► Intelligent design, self-test, abnormal alarm function. High-temperature warning, real-time monitoring of light intensity, automatic adjustment.
► Drive independent research and development design, currently used
in large quantities, stable and reliable performance;
► Precision optical design for optimal illumination output;
► Precision heat dissipation design ensures optimal heat
dissipation of LED modules;
► In India, Thailand, Singapore and the European Union, we have a
24-hour after-sales service team.
Optical modeling simulation
Application: Curved phone cover exposure
