Home Companies Shenzhen Bo-Net Technology Co., Ltd.

24 Port Huawei S5720 Gigabit POE Switch S5720-28P-PWR-LI-AC

Shenzhen Bo-Net Technology Co., Ltd.
Active Member

Contact Us

[China] country

Address: HD Building , Huafu Road, Futian, Shenzhen City, GUANGDONG PROVINCE, CHINA

Contact name:Sammi

Inquir Now

Shenzhen Bo-Net Technology Co., Ltd.

24 Port Huawei S5720 Gigabit POE Switch S5720-28P-PWR-LI-AC

Country/Region china
City & Province shenzhen guangdong
InquireNow

Product Details

S5720-28P-PWR-LI-AC Huawei S5720 24-Port Gigabit POE Switch+ 4 SFP Port

 

 

 

1Twenty-four PoE+ 10/100/1000BASE-T ports2

Four 1000BASE-X ports

Applicable modules:
  • GE optical module
  • GE-CWDM optical module
  • GE-DWDM optical module
  • GE copper module (works at 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s)
  • Stack optical module (only used for stack connection)
  • 1 m, 3 m, 5 m, and 10 m SFP+ high-speed copper cables (only used for stack connection)
  • 3 m and 10 m AOC cables (only used for stack connection)
  • 0.5 m and 1.5 m SFP+ dedicated stack copper cables (used for zero-configuration stacking, supported in V200R011C10 and later versions)
  • H87MMA5671A2 GPON optical module (applicable in V200R012C00 and later versions)
A license can be activated on the switch to increase the speed of the four optical ports to 10 Gbit/s. Applicable modules:
  • GE optical module
  • GE-CWDM optical module
  • GE-DWDM optical module
  • GE copper module (only 1000 Mbit/s supported)
  • 10GE SFP+ optical module (OSXD22N00 not supported)
  • 10GE-CWDM optical module
  • 10GE-DWDM optical module
  • 1 m, 3 m, 5 m, and 10 m SFP+ high-speed copper cables
  • 3 m and 10 m AOC cables
  • 0.5 m and 1.5 m SFP+ dedicated stack copper cables (used for zero-configuration stacking, supported in V200R011C10 and later versions)
  • H87MMA5671A2 GPON optical module (applicable in V200R012C00 and later versions)
NOTE:

If a port uses a GPON optical module, other 1000BASE-X optical ports cannot be used.

3

One PNP button

NOTICE:

Applicable in V200R012C00 and later versions:

To restore the factory settings and reset the switch, hold down the button for at least 6 seconds.

To reset the switch, press the button.

Resetting the switch will cause service interruption. Exercise caution when you press the PNP button.

4One console port
5One USB port6

Ground screw

NOTE:
It is used with a ground cable.
7

RPS socket

NOTE:

It is used with an RPS cable, which is not hot swappable.

8

Jack for AC power cable locking strap

NOTE:
The AC power cable locking strap is not delivered with the switch.
9

AC socket

NOTE:

It is used with an AC power cable.

--

 

Product Name
Huawei S5720-28P-PWR-LI-AC Switch
Uplink Interfaces
24 10/100/1000 base-t Ethernet ports +4 gigabit SFPS
Switch Capacity
336Gbps
Packet forwarding rate
51Mbps
MAC Address Table
16K
Dimensions (W x D x H)
442×220×43.6mm
Rated voltage range
100-240V AC,50/60Hz
Relative humidity
5%-95% RH
Operating temperature
0-45℃
Power Consumption
370W

 

Hot Products

Huawei S5710-28C-PWR-EI S5710 24 Port Gigabit POE Switch with CWDM-SFPGE-1471​ GE-CWDM module 1 ...
Huawei S5710-108C-PWR-HI 48 POE+ Gigabit Port 10G Switch with ES5D21G16T00 Interface Card Product ...
HUAWEI S5710-28X-LI-AC Huawei S5710 Switch 24 Port Gigabit Switch 4 10GE SFP+ ports​ 1 Twenty-four ...
Huawei S5710-52X-LI-AC 48 Gigabit Ethernet Ports, ,4x 10G SFP+ Ports Switch S5710 Series Switch​ 1 ...
S5720-28P-PWR-LI-AC Huawei S5720 24-Port Gigabit POE Switch+ 4 SFP Port 1 Twenty-four PoE+ 10/100...
Huawei S5720-28X-SI-AC S5720-SI Series Switch 24 Port Gigabit Ethernet Switch S5720-SI Series ...