Active Member
|
[China]
Address: No. 15th Road Keji 7th,Xi'an Hi-tech Zone , Xi'an Shaanxi
Contact name:Mandy
Shaanxi Xi an Unique-technology Co.,Ltd |
|
|
Water Activated Fiberglass Pipe Repair Wrap Fix Pipes and Wrap Pipes
Pipe repair bandage is an extremely convenient and effective product for the emergency repair of less severe pipe leaks on steel,HDPE, rubber hoses, ventilation ducts, plastic both underground and surface application. Quick and simple to use with no mixing or measuring required. A successful pipe repair can be achieved in only 30 minutes.
Water Activated Fiberglass Pipe Repair Wrap Fix Pipes and Wrap Pipes
| Resin Makeup | Water-activated Polyurethane |
| Heat Resistance | 150°C (300°F) |
| Pressure Resistance | Internal Pressure up to 15Mpa (5075psi) |
| Bonds to Most Pipes |
|
| Set Time | 20 – 30 minutes, sets under water |
| Chemical, Fuel and Oil Resistant |
|
Water Activated Fiberglass Pipe Repair Wrap Fix Pipes and Wrap Pipes
Water Activated Fiberglass Pipe Repair Wrap Fix Pipes and Wrap Pipes
| Name | Model | Size | Packing |
| Pipe Repair Bandage | UT002 | 50mm x 3.6m (2" x 12´) | 10rolls x 10rolls/ctn |
| UT003 | 75mm x 3.6m (3" x 12´) | 10rolls x 10rolls/ctn | |
| UT004 | 100mm x 3.6m (4" x 12´) | 10rolls x 10rolls/ctn | |
| UT005 | 125mm x 3.6m (5" x 12´) | 8rolls x 10rolls/ctn | |
| UT006 | 150mm x 3.6m (6" x 12´) | 8rolls x 10rolls/ctn |
Water Activated Fiberglass Pipe Repair Wrap Fix Pipes and Wrap Pipes
* Clean and roughen the damaged area with the metal file or wire brush, which will help resulting a more successful repair.
*Knead Steel Putty and apply firmly into damaged area. Putty has a
2-5 minute work time, and the bandage application must begin during
this time.
* Put gloves on,Soak bandage in fresh water for 10 seconds. Squeeze
bandage 1-2 times while in water to help activation.
* Squeeze out the access water, apply the bandage spirally around
the damaged pipe area. Extending up to 50mm (2″)either side of the
leaked area.
* With wet gloves, squeeze the bandage with a rotating motion until
resin stops foaming and is set.
Bond in 30 minutes Pipe Repair Bandage
Tips: To achieve the best result,the bandage should be more than
10mm thick (10-15 layers). Allow 30 minutes for bandage to set
rock-hard. 
a
l Use Rep 
ai
Water Activated Fiberglass Pipe Repair Wrap Fix Pipes and Wrap Pipes
Test Report:The Repair Bandage can with withstand the inner pressure over 15Mpa after activated with water. ( The repair tapes must be used together wih epoxy putty.
Delivery: 5-7 working days
Pipe Repair Bandage Black Repair Tape made in China Fiberglass Bandage
Water Activated Fiberglass Pipe Repair Wrap Fix Pipes and Wrap Pipes
Headquarter:
Address: No. 15th Road Keji 7th,Xi'an Hi-tech Zone , Xi'an Shaanxi
Tel. No.: +86-574-85257751
Fax. No.: +86-574-85567233
Mob. No.: +86 15929909062
Skype/Linkedin:mandy@unique-technology.com
To: Mandy E-mail: mandy@unique-technology.com
Website: https://www.unique-technology.com/
Water Activated Fiberglass Pipe Repair Wrap Fix Pipes and Wrap Pipes
