|
[China]
Trade Verify
Address: Room 1705,Office Building B1,Wanda Plaza,No.2707,Kaichuang Road,Guangzhou,Guangdong,China
Contact name:MileyZhu
Guangzhou Rongtao Medical Tech LTD. |
|
Verified Suppliers
|
|
|
Ultrasound Probe GE 9L-D Wide Band Linear Vascular Diagnostic Imaging Medical Equipment
Knowledge Point
The GE 9L-D is a linear transducer for advanced GE console ultrasound machines, including the premium Logiq and Vivid series ultrasound machines. It has a frequency range of 2.4-10.0 MHz and is designed also for compatibility with commercially-available contrast agents. It has a large footprint of 14 x 53 mm. You can purchase the GE 9L-D transducer from Rongtao Medical in fully good condition.
Parts of GE probes we can offer:
| Brand | Model | Compatible System |
| GE | 3.5C | Logiq 3/ Logiq 5/ Logiq 7/ Logiq 9/ Logiq A5/ Logiq P5/ Logiq S6/Vivid7 |
| GE | 3C | Logiq 3/ Logiq 5 |
| GE | 3Cb | Logic 200 Pro |
| GE | 3CRF | Logiq S6 |
| GE | 3CRF-D | Logiq S8/ Logiq E9 |
| GE | 3SP | LOGIQ P |
| GE | 3Sp-D | Voluson E6/Voluson E8 / Bt08 & Higher version |
| GE | 3S | vivid & Logiq series |
| GE | 3S-RS | Loqigbook/XP/ Vivid-I |
| GE | 3S-SC | venue 40 |
| GE | 3S-RC | Logiq C5/ Logiq C2/ Logiq C3 |
| GE | 3SC-RS | Vivid S5/ Vivid iq/ Vivid i |
| GE | 3.8CA | Logiq P3 |
| GE | 3V-D | Vivid E9 |
| GE | 3.8C-RC | Loqig C2/Logiq C3/ Logiq C5/ Logiq premiums |
| GE | 4C | Logiq & Vivid Series |
| GE | 4C-RC | Logiq C2/Logiq C3/Logiq C5/Logiq Premium |
| GE | 4C-RS | Vivid i Square/ Logiq e/ Vivid e |
| GE | 4C-SC | Venue 40 |
| GE | 4C-A | Voluson 730 |
| GE | 4C-D | Voluson E6/ E8 and Vivid E9 |
| GE | 4D3C-L | Logiq 9/ Logiq A5/ Logiq P5/ Logiq S6 |
| GE | 4V-D | Vivid E9 |
| GE | 4S | Logiq and Vivid series |
| GE | 5S | pediatric cardiac |
| GE | 5S-RS | Vivid q/ Vivid i/Vivid S5/Vivid S6 |
| GE | 6.5C-RC | Vivid q/ Vivid i |
| GE | 7L | Logiq and Vivid series |
| GE | 7L-RC | Logiq C2/ C5/ Logiq Premium |
| GE | 739L | Logiq 500 Pro/Vivid 3/Logiq 400 MD/Logiq 500 MD |
| GE | 7S | Logiq9/ Logiq 7/ Logiq S6/ Logiq 5/ Logiq 3 /Vivid 7/Vivid 3 |
| GE | 7.5L-RC | Logiq C2/Logiq C3/Logiq C5/Logiq Premium |
| GE | 8C | Logiq & Vivid series |
| GE | 8C-RS | Voluson i/ Voluson e/ Logiq i/ Logiqbook XP/ Logiqbook/ Vivid i (from rev. 6.1.0)/ Vivid S5 |
| GE | 8L-RS | Logiq e/ Vivid e/ Vivid i and Logiq Book XP |
| GE | 9L | Vivid 7 Pro/Vivid 3/Logiq 9/ Logiq 7/Logiq 5/Logiq 3/ Logiq 400 |
| GE | 9L-D | Voluson E6/Voluson E8/Vivid E9 |
| GE | 9L-RS | logiq e/ vivid e/ vivid I/ vivid q/ vivid s5/ vivid s6 |
| GE | 10Lb-RS | Logiq book |
| GE | 10S-RS | Logiq Book/ Logiq e/ Vivid e/ Vivid i/ Logiq i/ Vivid i Square |
| GE | 10L | Logiq 3/5/7/9/ Vivid 3/4/A5/P5/7 Expert/7 Pro/ Logiq S6 |
| GE | 11L | Logiq P5/A5/A5Pro/ Logiq P6/P6 Pro |
| GE | 11L-D | premium GE ultrasound machines |
| GE | 12L | Logiq & Vivid series |
| GE | 12L-RS | Logiq e/ Logiq l/ Vivid e/Vivid I Voluson e/Voluson I/Vivid Q/Vivid S5/ Vivid S6 |
| GE | 12L-SC | Venue 40 |
| GE | 12S-D | Vivid E9 |
| GE | AB2-7 | Voluson S6/ Voluson S8/Voluson 730 |
| GE | AC2-5 | Voluson 730 |
| GE | BE9C | Logiq series |
Warnings and cautions of ultrasonic probe
★The ultrasonic probe is a valuable device. It must be careful in the process of use. Avoid dropping, impact, or abrasion to transducers.
★When installing or removing the probe, first switch off the power and then operate it carefully.
★Avoid rapid and extreme temperature changes, as well as lengthy exposure to direct sunlight or a strong ultraviolet light source.
★Do not use sharp objects to penetrate the acoustic lens.Once the acoustic lens is damaged, the coupling gel is easy to enter the interior of the probe and damage the piezoelectric element.
★Do not soak transducer in any liquid above the recommended level as stated in the user manual for your system, please operate according to the manufacturer's instructions, otherwise it will lead to circuit failure or even burn out.
★Do not disinfect at high temperature, because the probe is equipped with piezoelectric ceramics, high temperature will weaken the effect.
★Before use, carefully check whether the housing and cable are damaged, so as to prevent the probe from high voltage injury.
★After the probe is used, the residual coupling gel on the probe must be wiped clean to prevent rats or other animals from gnawing the lens.
