|
[China]
Trade Verify
Address: Room 1705,Office Building B1,Wanda Plaza,No.2707,Kaichuang Road,Guangzhou,Guangdong,China
Contact name:MileyZhu
Guangzhou Rongtao Medical Tech LTD. |
|
Verified Suppliers
|
|
|
Ultrasonic Transducer Probe Siemens PH4-1 Phased Array/part of ultrasound machine
Siemens PH4-1 Phased Array transducer
1. Type:phased array
2. Frequency:4-1MHz
3. Compatible system: Acuson Antares
4. Application: abdominal, fetal echo and general radiology
5. Condition: pre-owned and original, in good working condition
6. With 60 days warranty
Other Siemens probes we can offer:
| Brand | Model | Compatible System |
| Siemens | 3.5C55S | G50/X150/X300 |
| Siemens | 6C1HD | S2000 |
| Siemens | 7.5L40A | G20/G40 |
| Siemens | 7.5L75S | G20 and Prima / Adara |
| Siemens | C7F2 | Antares/ X300 and X500 |
| Siemens | CH4-1 | Antares |
| Siemens | CH5-2 | G40/G60/X150/X300 |
| Siemens | CH6-2 | Antares |
| Siemens | CX5-2 | Antares/ Sonoline Elegra |
| Siemens | C6-2 | CV70/ G50/G60/ X300/X500 |
| Siemens | C6F3 | G50/G60 |
| Siemens | C5F1 | Antares |
| Siemens | C8-5 | X300 |
| Siemens | P10-4 | Antares |
| Siemens | PH4-1 | Antares |
| Siemens | P4-2 | G50/G60/CV70/X150/X300/X500 |
| Siemens | P5-1 | X300, X300PE |
| Siemens | EC9-4 | G40/ X150/ X300/Antares |
| Siemens | EV9F4 | X300 and Antares |
| Siemens | VFX9-4 | Antares |
| Siemens | VF13-5sp | Antares/X300/X500/G50/G60 |
| Siemens | VFX13-5 | Antares |
| Siemens | VF13-5 | X150/X300/X500/G40 /G50/G60/ Sonoline Sienna/Sonoline Elegra |
| Siemens | VF13-5 | Antares |
| Siemens | VF10-5 | Antares |
| Siemens | 4V1C | Sequoia 512 GI, Sequoia C512, S2000 |
| Siemens/Acuson | 4V1 | Sequoia |
| Siemens/Acuson | 6L3 | Acuson Sequoia |
| Siemens/Acuson | 8C4 | Sequoia 512 G /Sequoia C512 |
| Siemens/Acuson | 8L5 | Sequoia 512 |
| Siemens/Acuson | 8V5 | Sequoia |
| Siemens/Acuson | 7L3 | Cypress |
| Siemens/Acuson | 8V3 | Sequoia 512 /S1000 |
| Siemens/Acuson | 9EVF4 | S1000/ S2000 and S3000 |
| Siemens/Acuson | 9L4 | Acuson S2000/ Sequoia/Sequoia C512 |
| Siemens/Acuson | 10V4 | Sequoia |
| Siemens/Acuson | 15L8W | Sequoia 512 |
| Siemens/Acuson | 15L8 | Sequoia |
| Siemens/Acuson | 17L5HD | Sequoia 512 |
| Siemens/Acuson | 18L6HD | S1000, S2000, S3000 |
| Siemens/Acuson | AUX CW | Cypress / Cypress CV System |
| Siemens/Acuson | C3 | Aspen |
| Siemens/Acuson | EC9-4 | G40/ G60/X150/ X300 |
| Siemens/Acuson | EC7 | Aspen/ XP128 |
| Siemens/Acuson | EV-8C4 | Sequoia 512/ S2000 |
| Siemens/Acuson | EC-10C5 | Sequoia 512 |
| Siemens/Acuson | L5 | Aspen |
| Siemens/Acuson | L7 | Aspen/128XP-10 |
| Siemens/Acuson | TE-V5M | Sequoia/ Sequoia C512/Sequoia 512/ Aspen/ Cypress/S1000/S2000 |
| Siemens/Acuson | TE-V5Ms | Cypress/Sequoia/S2000/X300 systems |
| Siemens/Acuson | V4 | Aspen/ XP |
| Siemens/Acuson | V7 | Aspen/ XP |
Warnings and cautions of ultrasonic probe
★The ultrasonic probe is a valuable device. It must be careful in the process of use. Avoid dropping, impact, or abrasion to transducers.
★When installing or removing the probe, first switch off the power and then operate it carefully.
★Avoid rapid and extreme temperature changes, as well as lengthy exposure to direct sunlight or a strong ultraviolet light source.
★Do not use sharp objects to penetrate the acoustic lens.Once the acoustic lens is damaged, the coupling gel is easy to enter the interior of the probe and damage the piezoelectric element.
★Do not soak transducer in any liquid above the recommended level as stated in the user manual for your system, please operate according to the manufacturer's instructions, otherwise it will lead to circuit failure or even burn out.
★Do not disinfect at high temperature, because the probe is equipped with piezoelectric ceramics, high temperature will weaken the effect.
★Before use, carefully check whether the housing and cable are damaged, so as to prevent the probe from high voltage injury.
★After the probe is used, the residual coupling gel on the probe must be wiped clean to prevent rats or other animals from gnawing the lens.
