Leeb hardness tester THL370, Die cavity of molds, Heavy work piece,
3 inch screen LCD
Advantages
- Largest screen 3 inch , showing all functions and parameters.it is
the largest screen of leeb hardness tester in China , easy read and
operate.
- The best impact device in China we offer ,stable, ageing
resistance,through exam ,we can 2 years long time using ,but others
can not.
- Test at any angle, even upside down.
- Wide measuring range. It can measure the hardness of all metallic
materials. Direct display of hardness scales HRB, HRC, HV, HB, HS,
HL and three types of strength values immediately.
- Seven impact devices are available for special application.
Automatically identify the type of impact devices.
- Large capacity memory could store 600 groups (Relative to average
times32～1 ) information including single measured value, mean
value, testing data, impact direction, impact times, material and
hardness scale etc.
- Upper and lower limit can be preset. It will alarm automatically
when the result value exceeding the limit.
- Battery information indicates the rest capacity of the battery and
the charge status.
- User calibration function.
- USB port with the PC humanity multi-functions data proceeding
software.
- Original imported high speed thermal printer support the immediate
printing function. It can save data permanently.
- Li rechargeable battery as the power source. Charge circuit
integrated inside the instrument. Continuous working period of no
less than 200 hours (EL off and no printing).
- Auto power off to save energy.
- Excellent after-sale service system for high quality products---3
years’ guarantee and all life maintenance. Easy to buy and
comfortable to use.
Standard according including: national standard: GB/T 17394.1-2014;
GB/T1172-1999
EU standard: EN ISO 16859-2016
ASTM standard: ASTM A956(2012)
Main Application
- Die cavity of molds
- Bearings and other parts
- Failure analysis of pressure vessel, steam generator and other
equipment
- Heavy work piece
- The installed machinery and permanently assembled parts
- Testing surface of a small hollow space
- Material identification in the warehouse of metallic materials
- Rapid testing in large range and multi-measuring areas for
large-scale work piece
Technical Specification
- Measuring range:HLD(170～960)HLD
- Measuring direction:360 drgree.
- Hardness Scale:HL,HB,HRB,HRC,HRA,HV,HS
- Display:3 inch screen ,one of the biggest in China.
- Data memory: 600 groups max.(relative to impact times 32～1)
- Printing paper: width is (57.5±0.5)mm, diameter is 30mm
- Battery pack: 7.4V Li battery
- Battery charger: 9V/1A
- Continuous working period:about 150 hours(With backlight off, no
printing)
- Communication interface:USB1.1
- Outline dimensions:210mm*85mm*35m
Standard Configuration
| | No. | Item | Quantity | Remarks |
| Standard Configuration | 1 | Main Unit | 1 | |
| 2 | D type impact device | 1 | With cable |
| 3 | Standard test block | 1 | |
| 4 | Cleaning brush (I) | 1 | |
| 5 | Small support ring | 1 | |
| 6 | Battery Charger | 1 | 9V 1A |
| 7 | Paper for printing | 1 | |
| 8 | Manual | 1 | |
| 9 | Instrument case | 1 | |
| 10 | Software | 1 | |
| 11 | Cable with CD | 1 | |
