Active Member
|
[China]
Address: Room 102, No 2, Fllor, No 18 of Xinye Nan Street, Xiagang, Changan Town, Dongguan City, Guangdong Province
Contact name:Jiang
Dongguan Huiyue Technology Co., Ltd |
|
|
Automatic Metal Zinc Alloy Accessories Making Die Casting Machine
1. Double proportional control (electric regulation of pressure and flow, with a multi-level pressure and speed control as well as low pressure die close protection functions)
2. Dual circuit design (air injection and pressure building are
separately designed without mutual interference and fault
occurrence).
3. Four-stage (multi-stage) injection system:
A.Maximum speed> 8M/s (6M / s for those more than 2000T), which
can effectively control the filling time and casting formation, in
addition to unique braking and uniform acceleration injection
function that can effectively prevent flash and allow more flexible
injection process.
hot chamber die casting machine specification
| Item | Unit | RDH18 | RD38T | RD50T | RD88T | RD138T | |||
| Die Locking Force | KN | 180 | 380 | 500 | 880 | 1380 | |||
| Die Stroke | MM | 150 | 200 | 235 | 250 | 290 | |||
| Ejection Fore | KN | / | 34 | 52 | 52 | 110 | |||
| Ejection Stroke | MM | / | 40 | 60 | 60 | 85 | |||
| Die Thickness(Min~Max) | MM | 100-300 | 100-330 | 100-340 | 100-350 | 150-450 | |||
| Die Dimension | MM | 385×360 | 450×480 | 470×503 | 535×578 | 620×670 | |||
| Tie-bar Inner Spacing(V×H) | MM | 236×236 | 290×290 | 310×310 | 357×357 | 415×415 | |||
| Tie Bar Diameter | MM | 40 | 50 | 56 | 63 | 75 | |||
| Injection Port Position | MM | / | 0,-40 | 0,-50 | 0,-60 | 0,-80 | |||
| Injection Stroke | MM | 90 | 125 | 130 | 130 | 150 | |||
| Traverse Stroke | MM | 150 | 150 | 190 | 190 | 200 | |||
| Injection Fore | KN | 27 | 40 | 55 | 90 | 110 | |||
| Plunger Tip Diameter | MM | 35 | 40 | 45 | 50 | 55 | 50 | 60 | 65 |
| Specific Presure | Mpa | 28 | 32 | 25.4 | 26.9 | 22.2 | 34 | 38.9 | 33.1 |
| Shot weigh(Zn) | kg(Zn) | 464 | 0.78 | 0.98 | 1.26 | 1.53 | 1.26 | 2.1 | 2.46 |
| Hydraulic Pressure | Mpa | 7 | 10.5 | 10.5 | 10.5 | 14 | |||
| Electric Motor Capacity | KW | 5.5 | 7.5 | 7.5 | 11 | 15 | |||
| Volume of Crucible(Zn) | L/kg(Zn) | 20/150 | 50/325 | 55/360 | 55/360 | 55/360 | |||
| Volume of Oil | L | 180 | 200 | 200 | 240 | 300 | |||
| Machine Weight | TON | 1.5 | 3 | 3.4 | 3.6 | 6 | |||
| Over All Dimensions | m(L×W×H) | 2.5×1.2×1.7 | 3.47×1.3×1.7 | 3.95×1.38×1.9 | 3.95×1.38×1.9 | 4.51×1.51×2.3 | |||
| Item | Unit | RD160T | RD200T | RD300T | RD400T | ||||
| Die Locking Force | KN | 1600 | 2000 | 3000 | 4000 | ||||
| Die Stroke | MM | 340 | 390 | 460 | 550 | ||||
| Ejection Fore | KN | 110 | 110 | 150 | 180 | ||||
| Ejection Stroke | MM | 85 | 100 | 95 | 125 | ||||
| Die Thickness(Min~Max) | MM | 150-550 | 200-580 | 250-660 | 300-750 | ||||
| Die Dimension | MM | 670×670 | 760×760 | 870×870 | 1030×1030 | ||||
| Tie-bar Inner Spacing(V×H) | MM | 465×465 | 510×510 | 560×560 | 620×620 | ||||
| Tie Bar Diameter | MM | 80 | 90 | 110 | 130 | ||||
| Injection Port Position | MM | 0,-80 | 0,-100 | 0,-125 | 0,-125 | ||||
| Injection Stroke | MM | 150 | 175 | 200 | 230 | ||||
| Traverse Stroke | MM | 200 | 214 | 255 | 340 | ||||
| Injection Fore | KN | 110 | 130 | 158 | 182 | ||||
| Plunger Tip Diameter | MM | 60 | 65 | 70 | 75 | 70 | 75 | 70 | 80 |
| Specific Presure | Mpa | 38.9 | 33.1 | 34.6 | 30.1 | 41.1 | 35.8 | 48.3 | 37 |
| Shot weigh(Zn) | kg(Zn) | 2.1 | 2.46 | 3.33 | 3.83 | 3.81 | 4.37 | 4.4 | 5.7 |
| Hydraulic Pressure | Mpa | 14 | 14 | 14 | 14 | ||||
| Electric Motor Capacity | KW | 15 | 18.5 | 18.5 | 22 | ||||
| Volume of Crucible(Zn) | L/kg(Zn) | 55/360 | 110/720 | 110/720 | 200/1350 | ||||
| Volume of Oil | L | 300 | 400 | 600 | 800 | ||||
| Machine Weight | TON | 6.5 | 8.5 | 11 | 17.5 | ||||
| Over All Dimensions | m(L×W×H) | 4.8×1.51×2.3 | 5.6×1.7×2.4 | 5.6×1.7×2.4 | 7.4×1.9×2.55 | ||||
Machine Photo:
Machine Robot:
Factory:
Shipping:
Thanks for visiting our information, if you have any question, just contact us, have a nice day!
