HNCSB Ultrasonic Cleaner For PCB Ultrasonic Vinyle Record Washing Machine

HNCSB Ultrasonic Cleaner For PCB Ultrasonic Vinyle Record Washing Machine

How to use an ultrasonic cleaning to restore electronic and PCBs

Dust, dirty and corrosion can impact the performance of printed circuit boards (PCBs) used in electronic equipment exemplified by sophisticated hand-held devices such as iphones, some of which have been accidently dunked, can be restored, HNCSB is suggesting to use ultrasonic cleaning along with ultrasonic cleaning solution expecially formulated for delicate electronics

Selecting an ultrasonic cleaning machine

Ultrasonic cleaning machine, such as the tabletop, stationary series are ideal for small volume user in cleaning or used as household device, HNCSB can make to size and make customized function, e.g: heating power, timer, counter, temp display, resetting, cycling and filtering mounted and etc, the multistage ultrasonic cleaning machine is recommended for big factory, manufacturer. For them, HNCSB will consider the automatic loading, unloading and transmit among cleaning process, as well as drying system, water purification auxiliary

How to select and use the cleaning solution

The wrong cleaning solution, just as the wrong ultrasonic cleaning frequency, can do more harm that good, an ultrasonic cleaning solution ideal for glass and ceramic substrates, optics, PCBs plastic parts is the biodegradable concentrate detergent, is removes grease, oil, activated fluxes, dust, fingerprints, light corrosion and residues from coffee, tea, colars, milk and other sources

Depending on the extent of contamination this concentrate is diluted 3% to 10% with water, the recommended ultrasonic cleaning time is 3 to 10 minutes at approximately 65C/150F, after cleaning the parts, must be rinsed in distilled or deionized water, this is very important in order to remove any traces of cleaning solution residue, because tap water also will leave residue deposit, it must not be used as a rinse, dry the components thoroughly before reassembly

Note, that these are only guidelines of HNCSB, the user should consult with the ultrasonic cleaning professionals at HNCSB regarding equipment, solution and procedures to meet your requirements

Other suggestion from HNCSB

A fresh batch of ultrasonic cleaning solution contains entrapped air, you can see evidence of this by the bubbles that appear on the inside of a glass of water standing at room temperature, this air interferes with the cavitation process and must be driven off before you begin the cleaning operation to do under steps;

01: add water and correct portion of cleaning concentrate to the tank’s fill line

02: set the temperature dial

03: turn on the ultrasonic cleaning to start the degassing operation

The rising temperature coupled with the cleaning chemicals and ultrasonic energy will speed the degassing operation and at the same time thoroughly mix the contents of tank, when air bubbles not longer rise to the surface, you are ready to clean the parts, place them in the mesh basket, taking care to keep them from contacting each other, lower the basket into the basket into the cleaning solution and set the timer, as you become experienced with ultrasonic cleaning PCBs and other electronic components, you will become more proficient and efficient, the engineer at HNCSB are ready to help you reach this goal by selecting the ultrasonic cleaning model, frequency, power, cleaning solution, cleaning process that meets your requirements

Machine description:

1.The cleaning tank made of SUS316L

2.The machine crust material SUS304

3.Famous brand components were used in production,such as Omron timer and thermostat.schneider contactor etc.

4.The tank and lid are covered with insulatioin sheet,to provent heat leaking.

5. SUS304 strong castors.

6.SUS304 lid hinge,basket.

7.Two tanks,one ultrasonic tank,one rinsing tank.

8.Good surface surface treatment,no burr.

Provide customize service and make the machine upon customer's drawings.Or pls inform us what function you need,we design the machine for you.

OEM available 

OEM available:

We also can custom built the machine base on customer's requirements . Such as the custom built machine with these items : Filtration,weir tank , sparge bar , insulation tank and lid . Digital touch with automatic ultrasonic , agitation and filtration , heating,auxiliary timer etc .