|
[China]
Trade Verify
Address: Building 8#, No.50 West Road, White Deer River, Zhihe Town, Pengzhou City, Sichuan, China
Contact name:Jason
Sichuan Pure Science And Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Our advanced endotoxin removal filter modules are designed to deliver ultrapure water of exceptional quality. With a molecular weight cutoff of up to 5000 daltons, the module ensures removal of contaminants and delivers water of unparalleled purity.
Molecular Weight Cutoff (MWCO):
Achieve excellent molecular weight cutoff within 5000 Daltons,
effectively filtering out impurities and large molecules.
Colony Forming Units (CFU) Control:
Ensure that the produced water has an extremely low microbial load,
with total bacterial counts remaining below 10 CFU/ml.
Endotoxin levels:
Ensuring strict endotoxin control, levels remain below 0.03 EU/ml,
exceeding industry standards for ultrapure water.
First, there are no chemical disinfectants, no residual problems, high safety, short disinfection time, and a large amount of reverse osmosis water used for flushing disinfectants is saved, and the disinfection process can It is done automatically and no one is required to wait. Thermal disinfection combined with chemical disinfection is conducive to optimal water disinfection of water treatment equipment in hemodialysis water production equipment.
The effect of the hot water disinfection system depends on the
heating temperature and heating rate. Once the temperature and
heating rate do not meet the disinfection requirements, the
disinfection effect will be greatly reduced, and hot water
disinfection cannot remove the biofilm that has been produced.
At present, the pipeline disinfection method of dialysis water is gradually developing from chemical disinfection to hot water disinfection. Based on the advantages and disadvantages of hot water disinfection and chemical disinfection, in actual operation, we generally use a combination of hot water disinfection and chemical disinfection methods. , thermal disinfection is performed once a month, and chemical disinfection is performed every three months. During the chemical disinfection process, the residue of peracetic acid is strictly tested. After reaching the residue standard, the flushing time is extended for more than 2 hours to ensure that the residue reaches the minimum value.
After adopting the above disinfection method, in multiple water quality and microbial tests conducted within half a year, the results of the total number of bacteria and bacterial endotoxins were all at minimum values. For dialysis treatment, better microbial control will definitely bring better dialysis treatment effects, and it will certainly provide higher academic value for dialysis treatment in terms of prolonging patients' lives and improving patients' quality of life.
| Product model | CJ-NDS-(2000-4000) |
| Host size | 500mm 900mm 1700mm |
| Water inlet requirement | Qualified pure water for hemodialysis |
| Bacterial count index | Less than 5 colonies per milliliter |
| Operating temperature | 1 ℃ to 40 ℃ |
| PH value | 1 ~ 14 |
| Endotoxin index | Less than 0.001 EU/ml |
| Particle size | Less than 10 microns |
| Turbidity | Less than 4 NTU |
| Drainage condition | Floor drain with unobstructed drainage |
| Reference standard (bacterial count) | Less than 100 colonies per milliliter, with an intervention level of 50% of the maximum allowable level (according to YY0572-2015 standard) |
| Reference standard (endotoxin) | Less than 0.25 EU/ml, intervention level is 50% of the maximum allowable level (according to YY0572-2015 standard) |
2. Demand water quality indicators
It complies with YY0572-2015 industry mandatory standards and
American AAMI/ASAIO hemodialysis water standards.
3. The amount of water production you need
If you don’t know how much water the machine requires, you can choose the corresponding model based on the actual number of beds.
Sichuan Pure Science and Technology Co., Ltd. is one of the famous laboratory & medical-grade water treatment systems brands and manufacturers in China. We have focused on water treatment for nearly 20 years, with clients from over 20 countries, covering hundreds of industries. We focus on laboratory & medical-grade water systems. Our Water Systems are designed to meet or exceed the Type I, II, and III reagent-grade water platforms set forth by CAP/NCCLS or ASTM standards. for hospitals, research facilities, manufacturing, cosmetics, food service, and other applications. Till now, we already know in the market for our Excellent Industrial design and it is easy to use product design. We also have a modern standard factory area of about 3000 square meters and Chengdu marketing headquarters. There is a group of long-term engaged in water treatment technology research and development team, rich practical experience of after-sales engineers, with a number of patents.
