Results forul1278 cone test finger probefrom 5074 Products.
|
IEC 60529 Test Sphere50mm , IP1X This probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against ...
|
|
|
|
UL982 Probe For Uninsulated Live Parts And Film-Coated Wire Length 101.6mm Diameter 19.1 Description in UL982 2009 Clause 58.9.2: In the enclosure of an appliance other than as ...
|
|
|
|
IEC60065 Test Hook for Audio and Video Made by 304 Stainless Steel 1. Introduction The test hook is designed according to IEC60065 clause 9.1.7 and figure 4. It is mainly applied ...
|
|
|
|
Small Child test finger probe,jointed test finger probe Model TP18 IEC 61032, Figures 12 Small Child test finger probe,jointed test finger probe ( 0 - 36 months ) Model TP19: IEC ...
china
|
|
|
|
Test Rubber Ball Usage rubber ball used for dynamic stability testing to UL (USA) standards. A ball, 2 and 3/4/16 inch diameter (2.187 inches), filled with No. 60 core sand. It is ...
|
|
|
|
Test Plug For Mechanical Tests On Antenna Coaxial Sockets Product information: This test plug conforms to IEC60065 Figure 8 standard requirement. It is used to test the antenna ...
|
|
|
|
IEC60529 Stainless Steel 2.5mm Test Rod for IP3 and suffix C code Test Introduction: The 2.5mm Test Rod is used to verify the protection of persons against access to hazardous ...
|
|
|
|
Jointed child Finger Probe, test finger probe,safety access test probe Model TP18 Jointed Child Finger Probe ( 0 - 36 months ) Model TP19: Jointed Child Finger Probe ( 3 - 14 years ...
china
|
|
|
|
Antenna coaxial sockets mounted on the apparatus Antenna coaxial sockets mounted on the apparatus and incorporating parts or components which isolate HAZARDOUS LIVE parts from ...
|
|
|
|
IEC60335-2-14 Stainless Steel Test Probe Product information: The stirrer shall incorporate a biased-off switch that is recessed or guarded to prevent accidental operation. It ...
|
|
|
|
IEC60529 1.0mm Test Wire used for IP4 Code Test with Calibrated Certificate Introduction: Used to verify the protection of persons against access to hazardous parts. Also used to ...
|
|
|
|
IEC 60529 Test rod 2.5mm, IP3X Usage This wire is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against ...
|
|
|
|
IEC60335-2-14 Stainless Steel Test Probe Product information: The stirrer shall incorporate a biased-off switch that is recessed or guarded to prevent accidental operation. It ...
|
|
|
|
Steel Test Pin with Nylon Handle as Per BS1363-1 Figure 1 1. Introduction The test pin meets the requirements of BS1363-1 clause 12.6.1 and figure 1.The test pin meets the ...
|
|
|
|
Test Needle Diameter : Ø0.5mm or Ø1mm, Length : 20mm
|
|
|
|
IEC60335-2-24 Figure 102 Scratching Tool Tip Product information: The scratching tool tip is for home appliances whose accessible element surface of all protected cooling system, ...
|
|
|
|
Abration Resistance Test Pin Made by Hardened Steel Conforms to IEC60950 1. Introduction The scratch resistance test uses a hardened steel pin for scratching. The end of the steel ...
|
|
|
|
Stainless Steel Thrust Rod Product information: Thrust rod is according to the standards of IEC60884.1-2002 and IEC60950.1-2005 to manufacture. Test method: Touch the specimen by ...
|
|
|
|
IEC60335-2-80 Figure 102 Test Pin for Testing the Fan 1. Introduction The test pin is completed designed according to IEC60335-2-80 figure 102, it is to simulate the bolt of fan. ...
|
|
|
|
IEC61032 Test Finger Probe Test Probe B Jointed Test Finger 10N Force 1. Introduction of Test Probe B: The test probe is is design according to IEC61032 figure 2, meet the ...
|
|
|