Active Member
|
[China]
Address: No.300 zhongshan east road,Changfa Center CFC-A 907, Nanjing,Jiangsu,210001.P.R.China
Contact name:
Jaili Machinery Co., Ltd. |
|
|
TXK Brand 2 Ton Hook Type Electric Chain Hoist With CE and Overload Limiter
Product Description:
1. Electric motor partial outer cover
They are made of high strength aluminum system through compression
casting formation.
Features: Solid and light, Fast release heat, Continuous use,
Enclosed structure. Can be used in the chemical plants,
electroplating factories, and other places.
2. Side kind braking
This masterly structure ensure the hoist absolutly safety when the
power off. And ensures it is safe when has excess load. Also it
combine to the motor braking as the double brake system to
strengthen security and durability.
3. Gear
The gear made of alloy steel and through the heat treatment
4. Antiphase protector
Advatages: When power-supply wiring mistake, the control circuit is
unable to move.
5. Hooks
They are made by hot forging and heat treatment.
6. Chain
It is made of FEC80 ultra strong heat treatment alloy steel.
Advatages: It is safely approximately when used in the rain water,
the sea water, under the chemical and other bad conditions.
7. ISO: M4 /FEM: 1AM
Insulation grade: F
8. Protection class (hosit and push button): IP54
9. Powder supply: 3 phase, 200-600V, 50Hz
10. Noise (single/ double speed): 81dB.
* Break System:
1. Side Magnetic Braking Device, Ensure lock the hoist
2. Mechanical braker, Dual braking system, much more safety.
* Limit Switch:
With up & down Limit Switch, to prohibit the chains from
exceeding for safety.
* Chain:
G80 Chain, Origina imported from Japan. Anti-Rust and
Anti-corrosion
* Electromagnetic contactor:
1. With Schneider Electric (TESSIC), can be used safely under high
frequency.
2. Can be installed Variable-Vrequency Drive (VFD Electric) Can be
suitable for Singlle Phase Power supply.
* Inverse phase sequence protecting device:
It is sepcial electrical installation which controls the circuit
not to work in case of wiring error in the power supply.
* Gear:
The gear made of alloy steel, Through the heat treatment.
* Level of Protection Grade(IP Grade):
1. Hoist IP Grade: IP54
2. Push Buttom IP Grade: IP65
| 2t Electric Chain Hoist With Electric Trolley | |||||
| Type | 0.5-01 | 01-01 | 02-01 | 03-02 | |
| Capacity(t) | 0.5 | 1 | 2 | 3 | |
| Standard Lifting Height(m) | 3 | 3 | 3 | 3 | |
| Lifting Speed(m/min) | 6.8 | 6.6 | 6.6 | 4.4 | |
| Lifting Motor | Power(kw) | 0.75 | 1.5 | 3 | 3 |
| Rotation Speed(r/min) | 1440 | 1440 | 1440 | 1440 | |
| Phases | 3 | 3 | 3 | 3 | |
| Voltage(v) | 200-660 | 200-660 | 200-660 | 200-660 | |
| Frequency(Hz) | 50/60 | 50/60 | 50/60 | 50/60 | |
| Operating Motor | Power(kw) | 0.4 | 0.4 | 0.4 | 0.75 |
| Rotation Speed(r/min) | 1440 | 1440 | 1440 | 1440 | |
| Operating Speed(m/min) | 11/21 | 11/21 | 11/21 | 11/21 | |
| Phases | 3 | 3 | 3 | 3 | |
| Volatge(v) | 200-660 | 200-660 | 200-660 | 200-660 | |
| Frequency(Hz) | 50/60 | 50/60 | 50/60 | 50/60 | |
| Chain Turns | 1 | 1 | 1 | 1 | |
| Chain Specification | Ø6.3 | Ø7.1 | Ø10.0 | Ø10.0 | |
| Test Load(t) | 0.625 | 1.25 | 2.5 | 3.75 | |
| Weight(kg) | 47 | 61 | 115 | 122 | |
| I-Beam(mm) | 58-153 | 58-153 | 82-178 | 100-178 | |
| Weight Added with 1m Higher(kg) | 0.81 | 1.1 | 2.3 | 2. | |
