|
[China]
Trade Verify
Address: No. 128, Hailin Road, Rongtai Avenue, Wenjiang District, Chengdu City, Sichuan, China.
Contact name:liu
Sichuan Zuanshen Intelligent Machinery Manufacturing Co., Ltd. |
|
Verified Suppliers
|
|
|
Hydraulic Jumbo Rock Drill And Underground mining rock cutting
jumbo Used For Mine Drilling Hole
Introduction: It is a small and medium-sized hydraulic rock
drilling equipment independently researched, developed, and
manufactured by our company. It is mainly suitable for blasting and
bolting operations required for excavation of tunnels, mining,
hydropower, railways, highways, and other fields;
It adopts an advanced fully hydraulic rock drilling system,
equipped with an anti jamming drill device. It has a compact
structure, and the drilling arm is extendable. It can perform multi
angle and multi-directional drilling relatively parallel to the
working section. The climbing ability is ≤24%, the walking speed
can reach 12km/h, transition speed is fast. It is an excellent
underground mining and tunnel excavation mechanized drilling
equipment.
Technical specifications
| CYTJ45 Hydraulic Jumbo Rock Drill And Underground mining rock cutting jumbo Used For Mine Drilling Hole | |
| Overall dimensions (L*W*H) | 11354*2060*2525/3225mm |
| Cross section area | 31 square meters |
| Applicable cross-sectional area (b*h) | 6645mm*6060mm |
| Drilling diameter | Φ43mm- Φ89mm |
| Drill pipe length | 3700/4305mm |
| Drilling depth | 3315/3920mm |
| Motor power | 55kw |
| Hydraulic oil tank capacity | 180L |
| Overall weight | 13500kg |
| Drilling arm | |
| Rotation | ±180° |
| Propulsion downward/upward | 90°/3° |
| Travel compensation | 1500mm |
| Horizontal extension length | 1200mm |
| Chassis | |
| Diesel engine power | 80HP/60kW |
| Turning direction | ± 38° |
| Tires | 9.0*R20 |
| Climbing ability | ≤24% |
| Rear axle swing angle | ± 7 ° |
| Approach angle/departure angle | 18°/15° |
| Turning radius | inner side 5.5m/outer side 7m |
| Walking speed | 10km/h |
| Ground clearance | 265mm |
| Driving brake - Wet axle hydraulic brake | |
| Fuel tank | 80L |
| Electrical system | |
| Battery | 2*12v/120Ah |
| Driving lighting | 24V |
| Work lighting | 220v |
| Gas supply system | |
| Flow rate | 0.35m³/ Min |
| Working air pressure | 0.7Mpa |
| Water supply system | |
| Flow rate | 70L/min |
| Working water pressure | 0.8-1.2Mpa |
Product Advantages:
Adaptation range
The whole machine has the function of rotating 360 degrees in
multiple dimensions, drilling in all directions, truly drilling
without dead angles, and suitable for cross-sectional areas up to
31m²；
High security
Adopting a sturdy ceiling that can be lifted and protected,
ensuring the safety of operators, safety is the benefit;
High work efficiency
Direct control rock drilling system, equipped with automatic anti
jamming function, automatic end point retraction function, using
different hydraulic pumps for impact, rotation, and propulsion. Low
pressure and high flow hydraulic system takes into account
efficient rock drilling, preventing drill rod lock up, improving
drill rod consumption, and reducing operating costs;
Trolley arrangement
Ensure good visibility for operators, and the powerful four-wheel
drive articulated chassis ensures flexible, fast, and safe driving
in narrow tunnels;
Product pictures
Company Overview
