Active Member
|
[China]
Address: Building 3, International Enterprises Center, Guanggu Avenue 52#, Wuchang, Wuhan, China
Contact name:Pauline
Hubei Fotma Machinery Co., Ltd. |
|
|
Abrasive Tungsten Carbide Cutting Cutting Tooth / Cutting Teeth for Saw Blades
Carbide cutting teeth are typically used on saw
blades such as circular hand saws, miter saws and fixed table
saws. Small pieces of carbide teeth are secured to a round metal
blade. A high temperature resistant epoxy is used to hold the
carbide teeth in place. Carbide cutting teeth have the advantage of
being very hard, so they can maintain a sharp edge for a very long
time.
Description of Carbide Cutting Tooth / Cutting Teeth:
1. Can choose 0.4μm ultrafine WC for producting.
2. The highest hardness can up 93.5HRA,with excellent
wear-resistance.
3. Recommend to use the resistance welding and welding
plate,welding wire's high frequency welding.
4. Having all kinds of series and sizes molds,such as JX series,JP
series,JAseries,Europe standard and USA standard ect.
Advantages of Carbide Cutting Teeth:
1. Fresh material with fine grain size
2. Dust-free workshop
3. Advanced technology and production equipment
4. All of the mould with precision design
5. Strict quality testing and inspection
Material Grades for Tungsten Carbide Cutting Tools:
ISO code | China grade | Density | Hardness | TRS | Application recommended |
|
(g/cm3) | (HRA) | (MPa) |
| |||
K15 | YG6X, YG6A | 14.8-15.0 | 91.5-92.5 | 1800-2200 | Suitable for the finishing and semi-finishing of cast iron and nonferroius metals, also for the machining of manganese steel and hardening steel. |
|
K20 | YG6 | 14.8-15.0 | 90.5-91.5 | 1800-2200 | suitable for the semi-finishing of cast iron and nonferrous metal, also for the milling of cast iron and low-alloy steel. |
|
K30 | YG8 | 14.6-14.8 | 89.5-90.5 | 1900-2300 | suitable for the roughing of cast iron and nonferrous metal, also for the milling of cast iron and low-alloy steel. |
|
P10 | YT15 | 11.3-11.5 | 91.5-92.5 | 1400-1700 | suitable for the finishing of steel and cast steel with a moderate feed rate and rather high cutting speed. |
|
P20 | YT14 | 11.4-11.6 | 91.0-92.0 | 1500-1800 | suitable for the semi-finishing of steel and cast steel. |
|
P30 | YT5 | 12.9-13.1 | 90.5-91.5 | 1600-2000 | suitable for the heavy duty rough turning of steel and cast steel with a big feed rate at a medium and low speed under unfavorable working conditions. |
|
P40 | YC40 | 13.1-13.3 | 89.5-90.5 | 1900-2500 | suitable for the heavy duty turning of steel and cast steel with a big feed rate under unfavorable working conditions. |
|
M10 | YW1 | 12.8-13.0 | 91.5-92.5 | 1500-1700 | suitable for the finishing of heat-resistant steel, high manganese steel and stainless steel and low alloy steel. |
|
M20 | YW2 | 13.0-13.2 | 91.0-91.8 | 1600-1900 | suitable for the semi-finishing of heat-resistant steel, high manganese steel and stainless steel and low alloy steel. |
|
Size Chart of Carbide Cutting Teeth:
TYPE | Dimensions(mm) | Remarks | ||
Outer Diameter | Inner Diameter | Thickness | ||
SB60 | 60 | 20 | 0.5-3 | This kind of products widely used in the cutting of rubber, paper, wood and other materials. Different saw blades with special design and sizes used for different applications. We welcome you to bring forward your detailed requirements. |
SB70 | 70 | 30 | 0.5-3 | |
SB80 | 80 | 35 | 1-3 | |
SB90 | 90 | 40 | 0.5-3.5 | |
SB100 | 100 | 42 | 1-5 | |
SB110 | 110 | 45 | 1-5 | |
SB120 | 120 | 50 | 1-6 | |
SB200 | 200 | 55 | 1-5 | |
SB250 | 250 | 65 | 1-6.5 | |
SB380 | 380 | 100 | 1-6 | |
SB400 | 400 | 150 | 1-6.5 | |
SB415 | 415 | 168 | 1-6 | |
Products Show:
