Hubei Fotma Machinery Co., Ltd. |
|
K20 K30 Tungsten Carbide Wear Parts Carbide Pins Ground Finished
for Wear Resist
Tungsten carbide pins are mostly applied for end mill and drill
with sub-micron grain grade YG10X, for non-ferrous precision
cutting and wood cutting with Sub-micron grain grade YG6X, and for
fibreglass reinforced plastics, titanium alloys, hardened steel
with Ultra-fine grain grade YG8X, ect.
Applications of Carbide Pins:
Shafts
Valve Components
Automatic Door Components
Cable/ Electronic Connector
Fire Suppression System Components
Fittings/ Fasteners
Gears/ Hardware
Roller Bearings
Advantages of Tungsten Carbide Rods:
100% raw material.
Size standard as per your requirements
Professional suggestion on products
Fully adopted in advance technology and equipment
Professional manufacture for tungsten carbide items
Tungsten Carbide Parts
Dimensions and Tolerance of Carbide Pin Blanks:
Dimension & Tolerance | ||||
D diameter (mm) | L1 Length〔mm〕 | L2 Length〔mm〕 | D Diameter Tolerance | L Length Tolerance |
Dia. 1mm – 4mm | 310 | 330 | +0.15 ~ +0.60 | +0.00 ~ +10.00 |
Dia. 5mm – 10mm | +0.20 ~ +0.70 | |||
Dia. 11mm- 35mm | +0.25 ~ +0.80 |
D Diameter 〔mm〕 | D Diameter Tolerance 〔mm〕 | L Length 〔mm〕 | L Length Tolerance〔mm〕 |
D<3 | +0.15 ~ +0.60 | L<50 | +0.00 ~ +3.00 |
50≤L<100 | +0.00 ~ +3.50 | ||
3≤D<10 | +0.20 ~ +0.70 | 100≤L<200 | +0.00 ~ +(L×3%) |
D≥10 | +0.25 ~ +0.80 | L≥200 |
Carbide Rods Material Grades:
Grade | ISO Grade | Density g/cm3 | Hardness HRA≥ | Bending strength ≥N/mm² | Application |
YG3 | K05 | 15.20-15.40 | 91.5 | 1400 | Medium grain size, suitable for the cast iron and the non-ferrous metal precision work. |
YG3X | K05 | 15.20-15.40 | 92 | 1300 | Small grain size, suitable for the cast iron and the non-ferrous metal precision work. |
YG4C |
| 15.05-15.25 | 90 | 1620 | Macro grain size, suitable for the ball tooth rock drill and the mine rock drill piece |
YG6 | K20 | 14.85-15.05 | 90.5 | 1860 | Medium grain size, used for the non-ferrous metal the rough machining |
YG6A | K10 | 14.85-15.05 | 92 | 1600 | Small grain size, suitable for the wiredrawing mold and the woodworking tool |
YG6X | K10 | 14.85-15.05 | 91.7 | 1800 | Small grain size, suitable for non-ferrous metal cutting |
YG7 | K20 | 14.65-14.85 | 89.7 | 1900 | Grain alloy, good resistance to wear and good anti-shocking |
YG8 | K30 | 14.60-14.85 | 90 | 2060 | Medium grain size, suitable for the wiredrawing mold, draws the mold |
YG8A | K30 | 14.6-14.85 | 90 | 2000 | Medium grain size, suitable for the wiredrawing mold, draws the mold, woodworking blade and so on |
YG8X | K30 | 14.60-14.85 | 90.5 | 2000 | Small grain alloy, high temperature degree of hardness, oxidation resistance and the anti-resilience |
YG8C |
| 14.55-14.75 | 88 | 2160 | Macro grain size, suitable for the ball tooth rock drill and the mine rock drill piece |
Picture show: