High Pressure Sintering Cemented Carbide Rods ISO9001 For Drilling Milling

High Pressure Sintering ISO9001 Cemented carbide rods for Drilling and Milling

1. 100% virgin material.
2. Various sizes and full types of stock available.
3. Products can be customized upon the requirement.

Features of tungsten carbide rods
1. Better wear resistance, higher toughness, better deformation, and fracture resistance, results in a long life and good size accuracy.
2. Adopt advanced automatic extrusion equipment.
3. HIP sintering and precision grinding to ensure the good performance.
4. Both blank and finished tungsten carbide rods available.
5. Can reach a mirror effect surface after accurate grinding and polishing.

6. The standard roundness tolerance of the ground rod is 0.002mm.

Applications:
For making the drill bits, end-mills, reamers.

Quality control:
1. Each rod will be a drop from 1.2m higher place.
2. All raw materials are tested in terms of density, hardness, and TRS before use.
3. Every piece of product goes through in-process and final inspection.
4. Every batch of product can be traced.

Surface treatment: blank or grinding.

Forming way: extruded or die pressing.

Sinter: HIP sintering.

Feature: High wear resistance and toughness; High combination abilities; Precision Ground and polished

Sample: available

Packing: paper inside, carton or wooden box outside, or per customers' request

Grade Introduction

                                                                                                                                                                                                                                        Product Packaging

For more information, please don't hesitate to contact us.