Active Member
|
[China]
Address: LUKOU ECONOMIC DEVELOPMENT ZONE, ZHUZHOU CITY, HUNAN, P.R. CHINA 412100
Contact name:
JWE CARBIDE CO., LTD. |
|
|
Production Description:
The Composite Alloy Rods are made of tungsten carbide grits and Cu or Ni, using together with a large oxy-acetylene torch, sometimes the carbide powder can be used as the tips. Tungsten carbide crushed grits is the most economic choice in normal application, if you need high durability, a carbide insert would be more suitable.
The hardness is 89-01 HRA. The binder metal is Cu or Ni alloy, with a strength up to 690 MPA, hardness, HB higher than 160. Most of the composite brazing rods are made of crushing sintered tungsten carbide particles and bonded with a bronze nickel matrix with a low melting point (870 °C).
| Product Name | TC Composite Welding Rods |
| Brand | JWE |
| Material | 100% Virgin Tungsten Carbide |
| Grade | YGN70/YGU70 |
| Usage | Hardfacing/Coatings |
| Surface Treatment | Abrasive blasting |
Millimetres | Inches |
1,6-3,2 mm | 1/8"-1/16" |
3,2-4,8 mm | 3/16"-1/8” |
4,8-6,35 mm | 1/4"-3/16 |
6,35-8,0 mm | 5/16"-1/4" |
8.0-9,5 mm | 3/8"-5/16" |
9,5-12,5 mm | 1/2”-3/8” |
Product Packaging & Storage:
Company Introduction:
