|
[China]
Trade Verify
Address: Add: No. 88, Mingri Road, Liyu Industrial Area, Tianyuan District, Zhuzhou City, Hunan Province.P.R.C. P.C:412007
Contact name:Linda Chen
Zhuzhou Mingri Cemented Carbide Co., Ltd. |
|
Verified Suppliers
|
|
|
Long Lifetime Waterjet Spare Parts Abrasive Cutting Nozzle High Pressure Tungsten Carbide Water Jet Nozzles
Feature of carbide waterjet nozzle
1, Standard water jet nozzle: effectively extend the working life of the waterjet sand mixing pipe and successfully break through 150 hour working time of the traditional waterjet.
2, RIXIN enhanced nozzle: on the basis of type, further increase of strong performance, increase its density and hardness, and at the same time make its wear resistance to a higher leverl
3, RIXIN economy nozzle: using the same material and different production process , the production cost is greatly reduced, and the performance is well controlled .
4, RIXIN customized nozzle: we can produce according to customer requirement such as special shape or grinding or cost.
Description of carbide waterjet nozzle
| Item No | D (mm) | d (mm) | L (mm) |
| MR6030 | 6 | 0.76 | 76.2 |
| MR6040 | 6 | 1.02 | 76.2 |
| MR020 | 6.35 | 0.5 | 76.2 |
| MR030 | 6.35 | 0.76 | 76.2 |
| MR040 | 6.35 | 1.02 | 76.2 |
| MR7030 | 7.14 | 0.76 | 76.2 |
| MR7040 | 7.14 | 1.02 | 76.2 |
| MR76030 | 7.6 | 0.76 | 76.2 |
| MR76040 | 7.6 | 1.02 | 76.2 |
| MR945030 | 9.45 | 0.76 | 76.2 |
| MR945040 | 9.45 | 1.02 | 76.2 |
1. Refers to the high pressure abrasive water jet machine tool jet exit is used as the abrasive nozzle is mixed withwater.
2. The use of ultra-high pressure technology can turn ordinary tap water pressure to 250 ~ 400 mpa pressure, and then through the inner hole diameter to 0.15 ~ 0.35 mm ruby nozzle spray forming speed is about 800 ~1000 m/s high speed jet.
3. The nozzle and sand tube not to cause the premature wear of
pipe, in order to prolong the service life of the sand tube, before
use, first with sand tube with water, ensure that the water in the
center position.Rotary sand tube will increase to 120 degree of
wear and tear.Should pay attention to the following three
questions:
(1) the gem (diamond) have tube to the nozzle from the sand.
(2) check whether there is new gems (diamond) nozzle hole.
(3) the room appear mixed sand abrasion.
