|
[China]
Trade Verify
Address: Add: No. 88, Mingri Road, Liyu Industrial Area, Tianyuan District, Zhuzhou City, Hunan Province.P.R.C. P.C:412007
Contact name:Linda Chen
Zhuzhou Mingri Cemented Carbide Co., Ltd. |
|
Verified Suppliers
|
|
|
thin edge tungsten carbide slitting knife/ blade/ disc cutter for corrugated board paper printing industrcutting machine
Tungsten Carbide Round Cutter for PCB ,Hardwood Machining,SH6A,SH10A,WC,Cobalt
Description:
Tungsten carbide round cutter is supplied in a range of standard sizes for wood and steel-sawing applications.
These kinds of carbide round cutters are specially manufactured for cutting off and slotting metal materials such as plain steel, chilled steel, aluminum and copper as well as difficult-to-machine materials such as stainless steel, titanium alloys and printed circuit board.
Our tungsten carbide round cutters are precision made to reach a high standard, with specially
ground finish and tooth. Compared with the high speed steel saw, it can perform high speed cutting, with a high machining efficiency, accurate slitting and good surface finish.
Applications:
Tungsten carbide disc cutter is suitable for semifinishing the chilled cast iron, nonferrous
metal and its alloy. It is also suitable for semifinishing and finishing the hardened steel
and alloy steel.
Grade and Applications:
| Grade | Density g/cm3 | T.R.S MPα | Hardness HRA | Properties & Applications | Approx Grades in China | ISO |
| SH6A | 14.9 | 1850 | 92 | Fine grain alloy, good wear resistance. It is suitable for machining the chilled cast iron, nonferrous metal and its alloy. It is also suitable for semifinishing and finishing the hardened steel and alloy steel. | YG6A | K10 |
| SH10A | 14.8 | 2450 | 90.5 | High wear resistance and bending strength, suitable for disc cutters in electronics industry. | _ | K20-K30 |
| SH25 | 14.8 | 2200 | 89.5 | Higher strength, impact and shock resistance than SH6A, but lower in wear resistance and cutting speed. It is suitable for rough machining cast iron, nonferrous metal and its alloy as well as non metallic materials at low cutting speed. | YG8 | K20 |
| SH30 | 14.7 | 2320 | 89.5 | Higher strength, impact and shock resistance than SH25, but lower in wear resistance and cutting speed. It is suitable for rough machining cast iron, nonferrous metal and its alloy as well as non metallic materials at low cutting speed. | YG8 | K20 |
| SH35 | 14.5 | 2200 | 91 | Fine grain alloy with good wear resistance. It is suitable for machining hard wood, plywood,PCB, PVC and metals. | YG10X | K10-K20 |
| SH40 | 14.5 | 2480 | 92 | Fine grade alloy with high wear resistance, bending strength, bonding resistance and thermal strength. It is suitable for machining plywood, PCB, PVC,refractory alloys, stainless steel and high manganese steel etc. | YS2T | K10-K20 |
| SH50 | 14.3 | 2420 | 90 | Moderate wear resistance and bending strength ,suitable for machining steel alloy etc. | _ | K20-K30
|
| item | Common sizes OD*ID*T(mm) | Holes |
| 1 | Ø200*Ø122*1.2 | |
| 3 | Ø210*Ø122*1.3 | |
| 4 | Ø230*Ø110*1.3 | |
| 5 | Ø230*Ø130*1.5 | |
| 6 | Ø250*Ø105*1.5 | 6 holes*Ø11 |
| 7 | Ø250*Ø140*1.5 | |
| 8 | Ø260*Ø112*1.5 | 6 holes*Ø11 |
| 9 | Ø260*Ø114*1.6 | 8 holes*Ø11 |
| 10 | Ø260*Ø140*1.5 | |
| 11 | Ø260*Ø158*1.5 | 8 holes*Ø11 |
| 12 | Ø260*Ø112*1.4 | 6 holes*Ø11 |
| 13 | Ø260*Ø158*1.5 | 3 holes*Ø9.2 |
| 15 | Ø260*Ø170*1.5 | 8 holes*Ø9 |
| 16 | Ø265*Ø112*1.4 | 6 holes*Ø11 |
| 18 | Ø270*Ø168*1.5 | 8 holes*Ø10.5 |
| 20 | Ø270*Ø170*1.6 | 8 holes*Ø10.5 |
| 21 | Ø280*Ø168*1.6 | 8 holes*Ø12 |
| 22 | Ø290*Ø112*1.5 | 6 holes*Ø12 |
| 24 | Ø300*Ø112*1.5 | 6 holes*Ø11 |
tungsten carbide steel knife is mainly used for cutting paper,
rubber, plywood, hardwood, PCB, PVC, stainless steel, high
manganese steel and PCB, PVC electronic circuit boards and other
materials.
tungsten carbide steel knife products require high precision, no
glitches, maximum abrasion resistance.
we are using HIP sintered and fine grinding, polishing plating to
reduce frictions when cutting, improved the accuracy and speed
slitting greatly, tool life extended!
1, Soon after the order is confirmed, tungsten carbide steel knife
products will start to prepare the RTP powder as per customer’s
requirement with our wet-grinding machine
2, Before mass production, we need to do a trial pressing and
sintering using every mould, and we check the appearances and the
sizes of tungsten carbide steel knife samples with micrometer, projectors etc. to ensure that the
requirements of the drawings can be met before batch production
3, Bulk production ,press the raw materials to shape blanks,and all
tungsten carbide steel knife blanks must be passed by semi finished
inspection,
4, Then sinter blanks to finish (HIP) and finished products
inspection, we have 10 sets of vacuum sintering furnace and 2 sets
of HIP in the factory ensure the best quality and production
capacity.
Feel free to contact me if any needs:
Whatsapp/wechat/phone:008618593402651
Facebook:Xiao Aimee
zhuzhou mingri cemented carbide co. ltd
Email:mr009@mrcarbide.com
