Home Companies Zhuzhou TGC Cemented Carbide Co.,Ltd.

K40 Cemented Carbide Milling Blanks Non Ferrous Metals End Mill Bits HRA 92.2

Contact Us

[China]

Trade Verify

Address: Block B, building 4, Area B, Hi Tech New Makin Valley Xiangyuehuan Road, Tianyuan District, Zhuzhou, Hunan, China

Contact name:Ms Pan

Zhuzhou TGC Cemented Carbide Co.,Ltd.

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

K40 Cemented Carbide Milling Blanks Non Ferrous Metals End Mill Bits HRA 92.2

Country/Region	china
City & Province	zhuzhou hunan

Product Details

K40 Cemented carbide milling blanks Non-ferrous metals endmills with hardness HRA 92.2

ISO	Grain size	Cobalt	Density	Hardness	T.R.S	k1C
Code	μm	%	g/cm3	HRA	N/mm2	Mpa.m1/2
K40	0.6	10	14.45	92.2	4000	10.7

Application: Ultra-fine grain size, excellent heat resistance, suitable for high-speed milling and drilling, especially suit for making overall drill bits. Suitable to process alloy steel, heat-resistant alloy, cast iron, non-ferrous metals, stainless steel and other materials.

Regular size for small drills:

Diameter mm		Length mm		Diameter mm		Length mm
D	Tolerance	L	Tolerance	D	Tolerance	L	Tolerance
1.60	+0/-0.006	20	0/+0.5	10.00	+0/-0.009	50	0/+0.5
2.35		30	0/+0.5	10.00		70	0/+0.5
2.35		45	0/+0.5	10.00		72	0/+0.5
3.00		60	0/+0.5	10.00		75	0/+0.5
4.00	+0/-0.008	40	0/+0.5	10.00		80	0/+0.5
4.00		46	0/+0.5	10.00		90	0/+0.5
4.00		50	0/+0.5	10.00		100	0/+0.5
4.00		60	0/+0.5	12.00	+0/-0.011	70	0/+0.5
4.00		75	0/+0.5	12.00		79	0/+0.5
4.00		100	0/+0.5	12.00		83	0/+0.5
5.00		50	0/+0.5	12.00		100	0/+0.5
5.00		60	0/+0.5	12.00		120	0/+0.5
5.00		100	0/+0.5	13.00		100	0/+0.5
6.00		40	0/+0.5	14.00		75	0/+0.5
6.00		50	0/+0.5	14.00		80	0/+0.5
6.00		58	0/+0.5	14.00		83	0/+0.5
6.00		60	0/+0.5	14.00		100	0/+0.5
6.00		67	0/+0.5	16.00		80	0/+0.5
6.00		75	0/+0.5	16.00		90	0/+0.5
6		100	0/+0.5	20.00	+0/-0.013	100	0/+0.5
8	+0/-0.009	50	0/+0.5
8		60	0/+0.5
8		63	0/+0.5
8		75	0/+0.5
8		90	0/+0.5
8		100	0/+0.5

General Tolerance for ground carbide rods

General tolerance for the h6 finished ground solid carbide rods
Diameter	Tolerance μm	Length	Tolerance	Straightness	Tolerance	Circularity	Tolerances
＜3.0	-6/0	＜100.0	+0.5/+1.0	＜4.0	0.07	<3,0	2,0 micron
3.0-6.0	-8/0	100.0-165.0	+1.0/+2.5	4.5-5.0	0.06	3,0- 6,0	2,5 micron
6.0-1.0	-9/0	165.0-335.0	+1.0/+6.0	5.5-12	0.05	6,1-10,0	3,0 micron
10.0-18.0	-11/0			＞12.5	0.04	10,1-18,0	3,5 micron
18.0-30.0	-13/0					18,1- 30,0	4,0 micron
30.0-50.0	-16/0					30,1- 50,0	5,0 micron

General tolerance for the h5 finished ground solid carbide rods
Diameter	Tolerance μm	Length	Tolerance	Straightness	Tolerance	Circularity	Tolerances
＜3.0	-4/0	＜100.0	+0.5/+1.0	＜4.0	0.07	<3,0	2,0 micron
3.0-6.0	-5/0	100.0-165.0	+1.0/+2.5	4.5-5.0	0.06	3,0- 6,0	2,5 micron
6.0-1.0	-6/0	165.0-335.0	+1.0/+6.0	5.5-12	0.05	6,1-10,0	3,0 micron
10.0-18.0	-8/0			＞12.5	0.04	10,1-18,0	3,5 micron
18.0-30.0	-9/0					18,1- 30,0	4,0 micron
30.0-50.0	-11/0					30,1- 50,0	5,0 micron

Our tungsten carbide rods:

100% virgin material, no recycled material
Spray drying tower and HIP sintering furnace
Constant excellent quality
Large stock for all sizes, the regular products can be shipped in 3 days, and the special rods can be ground in one week.
100% inspected before delivery. The inspection including raw material and dimension report will be sent you before delivery
Excellent grinding quality, Straightless and circularity could be 0.05 or 0.02.

Carbide grades

What we can provide

Hot Products

0.7μM Cemented Carbide Milling Blanks Endmill K40 OD 2.35mm Fine Grain Size

0.7μm Fine Grain size Cemented carbide rods for endmills blank K40 OD2.35 Specification: Diameter ...

15% Cobalt Round Carbide Blanks K40 - K50 For Making Stamping Boring Tools

K40-K50 with good toughness for making stamping boring tools ISO Grade Grain Cobalt Density Hardness ...

Ra 0.2 Cemented Carbide Milling Blanks K30 K40 End Mill Bits For Stainless Steel

K30/K40 Cemented carbide endmills blank for stainless steel and cast iron ISO Grade Grain Cobalt ...

Solid Cemented Carbide Cutting Tool Rods K10 Hardness 92.5 For Grey Iron Metal

Cemented carbide rods for end milling tools for cutting grey iron metal ISO Grain size Cobalt ...

K40 Cemented Carbide Milling Blanks Non Ferrous Metals End Mill Bits HRA 92.2

K40 Cemented carbide milling blanks Non-ferrous metals endmills with hardness HRA 92.2 ISO Grain ...

YL50 Cemented Solid Carbide Round Blanks OD 16mm For Punching Dies

YL50 Cemented carbide rods OD16 for milling tools punching dies and tools Outer diameter: 16mm ...

Related Products