Active Member
|
[China]
Address: No.90 Jinyue Road, High-tech development zone, Zhuzhou city, Hunan province, China
Contact name:Kelly Tung
Hunan TRX International Co., Ltd. |
|
|
Engineering Polished Tungsten Carbide Tools Micro Machining High Wear Resistance
Size: Cusotmized
Feedback: Within 24 Hours
Material: 100% Virgin Tungsten Carbide
Performance: Excellent Abrasive Coefficient
Color: Grey
Surface: Ground, Polished, Or Blanks, Sand Blasted
High Light:tungsten carbide products,tungsten carbide mold parts
Product specification:
| Grade | Physical and mechanical properties | Applications recommended | ||
| Density g/cm3 | Hardness No Less Than HRA(HV) | TRS No Less Than (Mpa) | ||
| YG3 | 15.10~15.30 | 92.5 | 1700 | Superior wear resistance only less than YG3X, sensitive to impact and vibration, suitable for cast non-ferrous metal and its alloy finish turning, semi-finish turning, thread finish turning and hole expanding. |
| YG3X | 15.10~15.30 | 93.6 | 1450 | Best wear resistance in Tungeten and Cobalt alooy, but not good in anti-impact proprety, suitable for cast iron, non-ferrous and alloy, quenched steel, alloy steel small cutting section machining at high speed. |
| YG6 | 14.80~15.00 | 91.1 | 2100 | High wear resistance but less than YG3, better anti-impact and anti-vibration than YG3X, Suitable for cast iron, non-ferrous and alloy, non-metal material semi-finish machining and finish machining. |
| YG6X | 14.80~15.00 | 92.4 | 2000 | Belong to small granule Tungsten carbide alloy, wear resistance higher than YG6. Suitable for machining cold and hard alloy cast iron and heat resistance alloy steel, as well as finish machiing for normal cast iron. |
| YG8 | 14.6~14.80 | 90.5 | 2300 | High bending strength resistance, better anti-impact and anti-vibration than YG6, suitable for cast iron, non-ferrous and alloy, non-metal material rough machining at low speed. |
TRX tungsten carbide tools , made from 100% virgin raw materials. It can be used in wide application field. Zhuzhou Golden Ants tungsten carbide tools , good red hardness,excellent wear-resistance, high elastic modulus and compressive strength. The chemical properties of our tungsten carbide tools is stable, also the impact toughness & dialatation coefficient is low. The heat-conducting property and electrical conductivity of tungsten carbide tip is close to iron or iron alloy.
It is a very good material to produce the parts to resist high temperature & corrosion, also it is widely used as wear parts and shielding parts. We provide you tungsten carbide tools which can enhance your productivity and save your cost.
Advantages
1. Produced with advanced equipments and process
2. High quality with competitive price.
3. Large stock available.
1. 100% factory manufacture and factory direct sales
2. Small order is also welcomed.
3. We have more than 10 years experience.
4. Delivery on time.
1.100% raw material to produce tungsten carbide products.
2. Hip sintered, high hardness, high wear resistance
3. Various sizes and full types available
4. Reasonable price,Fast delivery time
5. OEM Customized(small order accepted,professional technical
support)
More details of specific type, please inform us
Features:
-- Superior wear resistance
Which means a reduction in the number of nozzles purchased over time
--Longer life time
This allows faster average cutting speeds and significantly reduced system downtime for nozzle
re-placement and system calibration
--Cost-effetive
These performance enhancements combine to make the entire cutting process more cost-effective.
Our Services
1> 24 hours technical support by Email or Calling.
2> Maintenance and technological support: Whole life.
3> Engineers available to service machinery overseas.
4> Free samples for testing
FAQ:
Q: Are you trading company or manufacturer ?
A: We are manufacturer of tungsten carbide since 2006. We can supply 20 tons tungsten carbide product per month. We can provide customized carbide products as per your requirements.
Q: How long is your delivery time?
A: Generally,it will take 7 to 25 days after order confirm.The specific delivery time depends on the specific product and the quantity you needed.
Q: Do you provide samples? iIs it free or charged?
A:Yes, we can offer a sample for free charge but the freight is at customers’ cost.
Q. Do you test all your goods before delivery?
A: Yes, we will do 100% test on our cemented carbide products
before delivery.
